- Feeds the internal 24 VDC I/O supply
- Uses external line-fuse protection
- Reports operating and module status by LED and software
X20PS2100 is a B&R internal i/o power supply module designed for the X20 System.
The module starts or refills an X20 I/O potential group without supplying X2X Link power.
Before installation or replacement, verify the complete material number, 24 VDC input tolerance, maximum 10 A slow-blow line fuse, absence of reverse-polarity protection, power-supply bus module, X20TB12, potential-group boundary, contact load, and station power budget.
Availability, condition, price, and shipping time for X20PS2100 are confirmed during quotation.
B&R X20PS2100 Internal I/O Power Supply Module Manuals, Datasheets, Links
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
- A maximum 10 ampere slow-blow line fuse is required
- The I/O supply input has no reverse-polarity protection
- Short-circuit behavior depends on the required line fuse
- The module feeds an internal I/O potential group
- Its power-supply bus module interrupts the left-side supply
- Group loading must remain within the documented limit
- X20TB12 is ordered separately
- X20BM01 or X20BM05 is required
- Accessories must match the exact station layout
- Starting a new 24 VDC X20 I/O potential group
- Adding an internal I/O feed without an X2X Link supply
- Segmented X20 stations requiring an independently fed internal I/O potential group