Features:
- Unarmored 3/8-24 UNF ceramic capped construction
- 3.2-inch overall case and 0.5-meter total length
- Miniature ClickLoc connector with protector
Option 32 gives this configuration a 3.2-inch case, shorter than the 3.6-inch variant while retaining the same 0.5-meter total length. The exact suffix should be used when checking mechanical reach.
Ceramic tip material is combined with an AISI 304 stainless-steel housing and FEP-insulated coaxial cable. Connector option 01 adds the protector around the miniature ClickLoc joint.
System performance depends on the complete probe, extension cable, and Proximitor Sensor assembly. Verify target material, cable route, mounting depth, and approval conditions together.
Apter Power confirms stock and sourcing for this 3.2-inch probe configuration at quotation.
Bently Nevada 146054-32-05-01-05 3300 Ceramic Capped Proximity Probe Manuals, Datasheets, Links
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
Bently Nevada 146054-32-05-01-05 3300 Ceramic Capped Proximity Probe Specs
General
- ManufacturerBently Nevada
- Model146054-32-05-01-05
- ConditionNew Original ready stock
- Product Family3300 Ceramic Capped Probe
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
Selected Configuration
- Family code: 146054 denotes the unarmored 3/8-24 probe.
- Case selection: 32 corresponds to 3.2 inches overall.
- Lead selection: 05 corresponds to 0.5 meter total length.
- Final option: 05 identifies multiple approvals.
Connection Details
- Signal cable: A 75-ohm coaxial lead carries the probe signal.
- Insulation: FEP insulation is used on the standard cable.
- Termination: A miniature coaxial ClickLoc connector is fitted.
- Protection: Connector option 01 includes the connector protector.
Matching Guidance
- Mechanical fit: Check mounting depth and wrench-flat access.
- System length: Select the correct extension cable for total electrical length.
- Conditioning: Confirm the matching Proximitor Sensor model.
- Documentation: Apply the approval-specific temperature schedule and drawing.