Features:
- The 330730-080-13-00 features armored FluidLoc cable construction that prevents oil and liquid leakage.
- This model includes an integrated connector protector for enhanced environmental protection.
- The 330730-080-13-00 is designed specifically for upgrading 7200-series 11 mm and 14 mm transducer systems.
The 330730-080-13-00 is specifically designed for use with the 3300 XL 11 mm Proximitor Sensor, which is intended to replace 7200-series 11 mm and 14 mm Transducer Systems. When upgrading from 7200-series systems to the 3300 XL 11 mm system, every component including the probe, extension cable, and Proximitor Sensor must be replaced with 3300 XL 11 mm components. The 330730-080-13-00 is an essential component for these complete system conversions.
The 3300 XL 11 mm Proximitor Sensor used with the 330730-080-13-00 features the same advanced capabilities found in the 3300 XL 8 mm Proximitor Sensor, including improved RFI/EMI immunity that achieves European CE mark approvals without special mounting considerations. Its thin design allows mounting in high-density DIN-rail installations or traditional panel mount configurations. The 330730-080-13-00 reliably transmits signals from these advanced sensors to monitoring equipment while maintaining signal integrity.
When upgrading to a 3300 XL 11 mm system using the 330730-080-13-00, the monitoring system must also be updated. For 3500 Monitoring Systems, an updated version of the configuration software that lists the 3300 XL 11 mm Transducer System as a compatible option is required. The 330730-080-13-00 ensures reliable signal transmission for these upgraded monitoring systems with its armored FluidLoc construction and integrated connector protector.
The 330730-080-13-00 Bently Nevada 3300 XL 11 mm Extension Cable may still be available for purchase and support from Apter Power beyond
End-Of-Life (EOL) by the manufacturer (OEM).
Bently Nevada 330730-080-13-00 3300 XL 11 mm Extension Cable Manuals, Datasheets, Drivers, Link
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
Bently Nevada 330730-080-13-00 3300 XL 11 mm Extension Cable Specs
General
- Manufacturer GE / Bently Nevada
- Model 330730-080-13-00
- Condition New Original ready stock
- Product Family
330730-080-10-00,330730-080-11-00,330730-080-12-00
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not
included with this equipment unless listed in the above stock item description. All prices are
shown in USD.
- Differential Expansion in Large Units: Specifically monitors the relative displacement between the rotor and cylinder during the start-up and shutdown of steam turbines caused by the different rates of thermal expansion.
- Axial Thrust: Monitors the wear of thrust bearings in large compressors or turbine units.
- Reciprocating Compressor Monitoring: Used to monitor piston rod drop, handling large reciprocating motion amplitudes.
- Mechanical Protection Compliance: Fully compliant with API 670 (American Petroleum Institute) standards for mechanical protection systems, ensuring shutdown protection is triggered in critical situations.
- Physical Protection (Armored Design): -13 in the code indicates the presence of stainless steel armor, effectively preventing cables from being mechanically crushed, cut, or chemically corroded, improving on-site safety.
- Environmental Certification: Complies with CE electromagnetic compatibility requirements. -00 at the end of the code indicates standard certification (usually including basic North American/European electrical safety standards). For specific explosion-proof area certifications, -05 is typically required.
- High Transmission Efficiency: The low-capacitance design ensures minimal signal attenuation from the probe to the proximitor, maintaining a high-sensitivity output of 3.94 V/mm (100 mV/mil).
- ClickLoc™ Connection Technology: The connector features an anti-loosening locking mechanism, ensuring efficient installation without special tools. It prevents connector loosening due to mechanical vibration, reducing false alarms and shutdowns.
- Long-Distance Adaptability: -080 in the code represents an 8.0-meter length. When used with a 1.0-meter probe, it can form a standard 9.0-meter system, facilitating preamplifier installation in junction boxes away from high-temperature and high-vibration areas, improving system maintenance efficiency.