Features:
- Exceptional Mechanical Reliability with TipLoc™ and CableLoc™ Engineering
- Seamless Field Interchangeability and API 670 Standard Alignment
- ClickLoc™ Coaxial Integrity paired with Global Multi-Agency Safety Approvals
The Bently Nevada 330101-00-70-10-02-05 is constructed with a high-strength Polyphenylene Sulfide (PPS) tip molded directly to the stainless steel body via a patented design. This prevents liquid ingress and structural separation under severe thermal cycling, while the specialized internal cable anchoring tolerates high tension loads during rough field routing.
Engineered to eliminate custom on-site calibration routines, the Bently Nevada 330101-00-70-10-02-05 provides immediate plug-and-play operation within any 3300 XL 8mm system. It guarantees a highly accurate incremental scale factor of 200 mV/mil when targeting AISI 4140 steel, ensuring full compliance with international petrochemical protection standards.
Featuring a vibration-resistant miniature coaxial connector, the Bently Nevada 330101-00-70-10-02-05 eliminates intermittent signal noise common in low-frequency environments. Combined with official ATEX, IECEx, and CSA intrinsic safety parameters, it allows engineers to confidently deploy the sensor across global hazardous processing areas.
The 330101-00-70-10-02-05 Bently Nevada 3300 XL 8mm Proximity Probe may still be available for purchase and support from Apter Power beyond End-Of-Life (EOL) by the manufacturer (OEM).
Bently Nevada 330101-00-70-10-02-05 3300 XL 8mm Proximity Probe Manuals,Datasheets,Link
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
Bently Nevada 330101-00-70-10-02-05 3300 XL 8mm Proximity Probe
General
- Manufacturer GE / Bently Nevada
- Model 330101-00-70-10-02-05
- Condition New Original ready stock
- Product Family 330101-00-70-10-02-00,330101-00-70-10-02-CN,330101-00-70-10-02-BR
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
- Turbine Supervisory Instrumentation (TSI): Universally deployed on utility-scale steam and gas turbines in power generation facilities to measure critical shaft dynamics under extreme operational velocities.
- Petrochemical Rotating Compressors: Ideal for high-pressure centrifugal and axial process compressors found in oil and gas refineries where shaft stability is essential to prevent catastrophic seal rubs.
- Large Industrial Motor/Generator Sets: Applied to heavy-duty induction motors and synchronizing generators within water treatment plants, paper mills, and mining operations to track sleeve bearing wear.
- Critical Balance-of-Plant (BOP) Pumps: Provides continuous shaft displacement oversight on boiler feed pumps, cooling water pumps, and high-volume pipelines to guard against sudden hydrodynamic imbalance.
- Dynamic Radial Vibration Track: Continuously monitors radial shaft vibration within fluid-film bearings, providing real-time data to help operators identify rotor unbalance, misalignment, and oil whirl.
- Axial Thrust Position Verification: Tracks structural rotor axial displacement relative to the thrust bearing face, providing early warnings to trigger automatic safety trips before catastrophic axial contact occurs.
- Keyphasor® Phase & Speed Measurement: Supplies high-slew-rate voltage pulses from shaft keyways or timing marks, allowing control systems to calculate absolute RPM and execute precise phase-angle phase tracking.
- DCS/PLC Protective Loop Integration: Feeds clear analog signals to machinery protection monitors (such as Bently Nevada 3500 or 3701 modules), which connect directly to plant emergency shutdown (ESD) loops.
- Wide-Spectrum Thermal Resilience: Operates smoothly across an ambient temperature range of -52°C to +177°C, allowing the sensor tip to withstand radiant heat from hot turbine casings and extreme cold weather installations.
- Corrosive Processing Atmosphere Defense: The AISI 303/304 stainless steel case and Fluoroethylene Propylene (FEP) cable insulation resist degradation from moisture, oil mist, ammonia, and chemical vapors typical in chemical processing plants.
- High Electromagnetic Field Immunity: Engineered with advanced triaxial shielding to protect the low-voltage eddy current signals from heavy radio frequency interference (RFI) and electromagnetic fields caused by nearby high-voltage motors.
- Differential Fluid Pressure Sealing: Outfitted with a premium internal Viton® elastomer O-ring that seals differential gas and oil pressures between the probe tip and the exterior casing, preventing process fluids from leaking along the cable run.