Features:
- Eddy Current Sensing Element for Non-Contact Vibration and Position Measurement
- Integral Component of the 3300 XL 8 mm Proximity Transducer System
- Certified for Hazardous Area Deployment with CSA, ATEX, and IECEx Approvals
The 330101-00-70-10-02-CN operates as the primary sensing element in a 3300 XL 8 mm proximity transducer system, providing accurate non-contact measurement of both static (position) and dynamic (vibration) values on fluid-film bearing machines. It continuously generates an eddy current field at the probe tip and converts the interaction with the observed conductive surface into a signal that is transmitted through the standard cable and processed by the 3300 XL Proximitor Sensor.
The 330101-00-70-10-02-CN provides essential sensing functions as part of the complete transducer system, and is a critical component of the monitoring path, directly affecting the proper, normal operation of the overall vibration and position monitoring system. One 330101-00-70-10-02-CN probe is required per measurement point, and it must be paired with a compatible 3300 XL extension cable and 3300 XL Proximitor Sensor to form a complete measurement channel.
For applications requiring measurement flexibility or system standardization, the 3300 XL 8 mm system supports full interchangeability of all transducer components. In addition to standard single-probe operation per measurement point, the 330101-00-70-10-02-CN can be deployed alongside other 3300 XL 8 mm probes and is backward compatible with other non-XL 3300 series 5 mm and 8 mm transducer system components. The 3300 XL system executes component interchangeability using the standardized design specifications inherent in the 3300 XL platform.
The 330101-00-70-10-02-CN Bently Nevada 3300 XL 8 mm Proximity Probe may still be available for purchase and support from Apter Power beyond End-Of-Life (EOL) by the manufacturer (OEM).
Bently Nevada 330101-00-70-10-02-CN 3300 XL 8 mm Proximity Probe Manuals,Datasheets,Link
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
Bently Nevada 330101-00-70-10-02-CN 3300 XL 8 mm Proximity Probe Specs
General
- Manufacturer Bently Nevada
- Model 330101-00-70-10-02-CN
- Condition New Original ready stock
- Product Family 330101-00-70-10-02-05,330101-00-70-10-02-00
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
- Radial Shaft Vibration: Measures dynamic displacement in journal bearings to identify rotor imbalance or shaft misalignment.
- Axial Thrust Position: Tracks longitudinal shaft movement to prevent catastrophic rotor contact with thrust plates.
- Keyphasor & Speed Sensing: Detects a physical shaft notch to calculate exact RPM and provide phase angle timing reference.
- Rotor Eccentricity: Determines physical shaft bow or thermal warping during low-speed startup and coast-down cycles.
- Extreme Temperatures: Outer tip and internal probe body operate continuously from -51 °C up to +177 °C.
- Corrosive Resistance: Polyphenylene Sulfide tip material provides chemical immunity against hot synthetic oils and industrial lubricants.
- High-Pressure Sealing: Integrated Viton O-ring seals fluid-film bearing housings against high internal oil pressures.
- Signal Noise Immunity: Grounded coaxial shielding prevents electromagnetic or radio frequency interference from corrupting critical sensor signals.
- API 670 Standard: Matches industrial machinery protection regulations with a linear scale factor of 7.87 V/mm (200 mV/mil).
- Automated OK Circuit: Constantly checks the loop circuit integrity and instantly blocks false emergency trips if a wire breaks.
- High Mechanical Strength: Patented TipLoc and CableLoc structural designs resist heavy fluid drag up to 330 Newtons of force.
- Hazardous Area Certification: The "CN" designation confirms regional intrinsic safety certifications for explosive oil and gas zones.