Bently Nevada 330104-00-04-05-02-00
Bently Nevada 330104-00-04-05-02-00
Bently Nevada 330104-00-04-05-02-00
Bently Nevada 330104-00-04-05-02-00
Bently Nevada 330104-00-04-05-02-00
Bently Nevada 330104-00-04-05-02-00
Ask our team:
  • Phone: +86 181 0690 9650
  • E-Mail sales1@apterpower.com
How We Verify Your Order
Before dispatch, we confirm the exact model, revision, condition, inspection requirements and shipping documents for your order.
See a real on-site verification case >>
  • Lifecycle status

    Active / Available from OEM
    Apter Power offers procurement support, technical documents and 40 mm case guidance.

330104-00-04-05-02-00

/ 4.9
1001 reviews | Need a Specific Revision?
330104-00-04-05-02-00 is the 40 mm case version of the armored M10 x 1 probe, with a 0.5 m lead and unprotected ClickLoc connection.
In Stock
Ships by Saturday, November 14
Fast Shipping Available
Get a quick price for 330104-00-04-05-02-00
Quantity
*E-mail
Company
*Mobile
*Content
Upload (gif, jpg, jpeg, png, bmp, doc, docx, xls, xlsx, ppt, pdf, csv)

Technical specifications for 330104-00-04-05-02-00

  • Manufacturer:
    Bently Nevada
  • Part Number:
    330104-00-04-05-02-00
  • Product Family:
    3300 XL 8 mm Probe
  • Stock:
    1
  • Probe construction:
    M10 x 1 standard-mount probe with flexible stainless-steel cable armor
  • Unthreaded length:
    0 mm
  • Overall case length:
    40 mm
  • Integral lead length:
    0.5 m (1.6 ft)
  • Connector:
    ClickLoc connector without connector protector
  • Probe cable:
    Standard 75 ohm FEP-insulated cable
  • Probe tip material:
    Polyphenylene sulfide (PPS)
  • Probe case material:
    AISI 303 or 304 stainless steel
  • Final ordering suffix:
    00 - agency approvals not required
  • Weight:
    0.162 kg
  • Estimated shipping dimensions:
    1.8x1.5x59cm
  • Tariff Code:
    Please confirm the destination before shipping
  • Country of origin:
    USA
  • Place of shipment:
    Xiamen,Fujian,China
By purchasing this item, you agree to the Terms & Conditions, ApterPower is not an authorized distributor for listed manufacturers or tradenames and therefore the manufacturer's warranty does not apply. All our products come with ApterPower's 1-year warranty.

More Information

Overview Manuals Armored Lead 40 mm Case Commissioning Applications

Features:

  • 40 mm armored body: The M10 x 1 case extends 10 mm farther than the compact 30 mm variant.
  • Flexible lead protection: Stainless-steel armor surrounds the 0.5 m integral probe cable.
  • Open ClickLoc joint: Connector option 02 is supplied without a separate protector.
The additional case reach changes the installed tip position while retaining the armored construction of the 330104 family.

Routing should support both armor transitions and leave enough clearance for the unprotected ClickLoc connection.

A compatible extension cable completes the intended 5 m or 9 m system after the mechanical position is established.

Apter Power supports Bently Nevada 330104-00-04-05-02-00 3300 XL 8 mm Probe documentation, quotations and 40 mm case review.
Bently Nevada 330104-00-04-05-02-00 3300 XL 8 mm Probe Manuals,Datasheets,Link
Important Notice: Match the complete code, M10 x 1 port, case reach, electrical system length and site approval requirements before installation.
  • Armor coverage: Flexible stainless-steel armor protects the 0.5 m integral cable.
  • Transition support: Secure the armor near the probe and connector without imposing a tight bend.
  • Route clearance: Keep the armored lead away from rotating parts, sharp edges and hot surfaces.
  • Open joint: The ClickLoc connector remains unprotected and must stay clean, dry and strain relieved.
  • Thread interface: M10 x 1 case with a maximum 15 mm thread engagement.
  • Unthreaded section: The code specifies no unthreaded reach ahead of the mounting thread.
  • Body length: The 40 mm overall case provides 10 mm more body reach than the 30 mm version.
  • Port check: Confirm the added body length preserves target position and connector clearance.
  • Flat target: Use at least a 15.2 mm target diameter for the documented response.
  • Shaft geometry: Use 50.8 mm minimum diameter, with 76.2 mm recommended where practical.
  • Center gap: Establish approximately 1.27 mm, corresponding to about -9 Vdc in a matched system.
  • Final reading: Stabilize the complete probe, extension cable and Proximitor chain before recording values.
  • Fluid-film bearing points: Relative shaft-vibration measurement on turbines, compressors, pumps and motors.
  • Axial-position channels: Static displacement measurement against a conductive target with the documented probe orientation.
  • Keyphasor reference: Once-per-turn phase reference where target geometry and channel setup follow the monitoring design.
  • Speed measurement: Rotational-speed sensing when the 3300 XL 8 mm signal is accepted by the configured monitor channel.
Description
330104-00-04-05-02-00 is the M10 x 1 standard-mount probe in the Bently Nevada 3300 XL 8 mm proximity transducer family. Its ordering code defines 0 mm of unthreaded length, a 40 mm overall case and a 0.5 m integral lead with a miniature coaxial ClickLoc connector without connector protector; the 330104 construction adds cable armor.

In a correctly matched transducer chain, 330104-00-04-05-02-00 supplies the eddy-current signal used for relative shaft vibration and static position measurement. The same family supports Keyphasor phase reference and speed measurement where the target geometry, Proximitor sensor and receiving monitor channel are selected for that duty.

The complete code for 330104-00-04-05-02-00 should be matched to the installed M10 x 1 port, case reach, cable route and electrical system length before service. Combine with a compatible extension cable to complete the selected 5 m or 9 m system length. Preserving the full suffix also prevents confusion with visually similar probes that use different connector protection or approval options.
Alternative Names
3301040004050200 330104 00 04 05 02 00 330104/00/04/05/02/00 330104_00_04_05_02_00 Bently Nevada 330104-00-04-05-02-00 BN 330104 00 04 05 02 00 3300 XL 8 mm 0-40 0.5 m probe 330104 M10x1 0 mm 40 mm probe
Technical notes
330104-00-04-05-02-00 is the probe component of a 3300 XL 8 mm transducer chain, not a complete measurement system. Confirm the M10 x 1 port, maximum 15 mm thread engagement, 40 mm case reach and 0.5 m electrical length before installation; target material, shaft geometry, cable routing and monitor-channel setup remain application decisions.
Exceptional Service

Our Mission

  • 100% Satisfaction

    We believe expertise is priceless. With over 20 years of experience, and top engineers on staff, we can help you solve or avoid problems that threaten your business.
  • Trust Guaranteed

    Not only do we have a vast inventory, our team makes sure every piece of equipment is in working condition. Your purchases are also backed by our Warranty.
  • Expertise

    Time is money, especially when your equipment is down. We work quickly to get your equipment on its way so you can get it back up and running.

FAQS

The following is a list of questions commonly asked by our customers. Please contact us if you have a question about our process that is not answered below.
How does 330104-00-04-05-02-00 differ from the 30 mm case version?
It keeps the same 0.5 m armored M10 x 1 configuration but uses a 40 mm overall case instead of 30 mm, changing how far the body reaches into the mounting arrangement.
What should be measured before installing 330104-00-04-05-02-00?
Verify the port shoulder, available depth and target position against the 0 mm unthreaded option and 40 mm case. Also observe the 15 mm maximum M10 thread engagement.
Does 330104-00-04-05-02-00 include a connector protector?
No. Connector option 02 provides the miniature coaxial ClickLoc connector on standard probe cable without a protector; the probe cable itself is armored by the 330104 construction.
How is the 0.5 m lead on 330104-00-04-05-02-00 matched electrically?
Select a compatible extension cable so probe plus extension cable equals the documented 5 m or 9 m 3300 XL Proximitor system length.
Which temperature range applies to 330104-00-04-05-02-00?
The standard probe is specified from -52°C to +177°C for operation and storage. The cable route, connector and pressure-seal duty still require application review.
What target size should be used with 330104-00-04-05-02-00?
Use at least a 15.2 mm flat target. On rotating shafts, 50.8 mm is the minimum diameter and 76.2 mm is the recommended minimum for scale-factor control.