Ask our team:
  • Phone: +86 181 0690 9650
  • E-Mail sales1@apterpower.com

330104-00-08-50-01-05

/ 4.9
1001 reviews | Need a Specific Revision?
By providing accurate real-time data, 330104-00-08-50-01-05 helps prevent unexpected failures, reduces maintenance costs, and supports predictive maintenance strategies in industries including power generation, oil and gas, and petrochemical processing.
Get a quick price for 330104-00-08-50-01-05
Quantity
*E-mail
Company
*Mobile
*Content
Upload (gif, jpg, jpeg, png, bmp, doc, docx, xls, xlsx, ppt, pdf, csv)

Technical specifications for 330104-00-08-50-01-05

  • Manufacturer:
    Bently Nevada
  • Part Number:
    330104-00-08-50-01-05
  • Product Family:
    3300 XL 8 mm Probe
  • Unthreaded Length:
    0 mm
  • Overall Case Length:
    80 mm
  • Total Length:
    5.0 meters (16.4 feet)
  • Connector -Type:
    Miniature coaxial ClickLoc connector with connector protector
  • Cable-Type:
    standard cable
  • Standard Cable Impedance:
    75 Ω
  • Cable Structure:
    Triaxial
  • Maximum Pull Strength:
    330 N (75 lbf)
  • Probe Gap During Testing:
    Probe Gap During Testing
  • Power Supply Sensitivity:
    < 2 mV per volt
  • Weight:
    0.54 kg
  • Estimated shipping dimensions:
    28x28x3cm
  • Tariff Code:
    8537101190
  • Country of origin:
    USA
  • Place of shipment:
    Xiamen,Fujian,China
By purchasing this item, you agree to the Terms & Conditions, ApterPower is not an authorized distributor for listed manufacturers or tradenames and therefore the manufacturer's warranty does not apply. All our products come with ApterPower's 1-year warranty.

More Information

Overview Manuals Specifications Environmental Ratings Use Cases Communication & Connectivity

Features:

  • Interface Between the Rotating Shaft and Condition Monitoring System
  • Combines Capability of Vibration/Displacement Measurement with Extended Cable Support
  • Operates in Conjunction with the 3300 XL Series and Standard 3500 Monitors
The 330104-00-08-50-01-05 operates as the 3300 XL 8 mm Proximity Probe in rotating machinery applications, providing precise vibration and displacement measurement for critical industrial equipment. It continuously converts physical displacement (0-2 mm range) to accurate electrical signals through eddy current technology and transmits these signals through its 5.0-meter armored cable to support steady state monitoring of all rotating components. Seamless signal transmission is standard with the 330104-00-08-50-01-05, however using an optional extension cable configuration will allow flexible installation across large machinery setups or where remote mounting is required. The 330104-00-08-50-01-05 has made improvements in several areas over previous proximity probe designs in addition to incorporating M10 x 1 threaded body construction capability within harsh industrial environments.

The 330104-00-08-50-01-05 provides essential measurement functions common to the entire machinery protection system, and is a critical component of the monitoring path, directly affecting the proper, normal operation of the overall condition monitoring system. One or multiple 330104-00-08-50-01-05 probes are required per machine train depending on the desired measurement points. The 330104-00-08-50-01-05 occupies only a single M10 x 1 threaded mounting position in the machine housing and is always located at the measurement point (target position, the dedicated sensing location).

For Dual Channel Monitoring applications, the 3500 System requires a second 330104-00-08-50-01-05 proximity probe module installed in the complementary position. In addition to standard single probe operation, the redundant configuration also performs automatic signal verification. The 330104-00-08-50-01-05 dual probe configuration executes measurement using the internal circuitry specified in the monitor options. Using this method, the redundant measurement system continually monitors the health of both signals. If the system detects that the primary probe is no longer providing stable output (outside configured signal/tolerance levels), it will automatically transfer the monitoring to the secondary probe and place an event in the System Event List.

The 330104-00-08-50-01-05 Bently Nevada 3300 XL 8 mm Proximity Probe may still be available for purchase and support from authorized distributors beyond End-Of-Life (EOL) by the manufacturer (OEM).

Bently Nevada 330104-00-08-50-01-05 3300 XL 8 mm Proximity Probe Manuals,Datasheets,Link Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
Bently Nevada 330104-00-08-50-01-05 3300 XL 8 mm Proximity Probe Specs

General

  • Manufacturer GE / Bently Nevada
  • Model 330104-00-08-50-01-05
  • Condition New Original ready stock
  • Product Family 330104-00-08-50-01-00,330104-00-08-50-01-CN,330104-00-08-50-11-05
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
  • Pressure Sealing: Designed to seal differential pressure between the tip and case using a Viton O-ring.
  • Humidity: Rated for 100% condensing humidity (non-submersible) provided the connectors are protected.
  • EMI/RFI Immunity: Highly resistant to radio frequency interference, allowing installation in non-metallic (fiberglass) housings without signal degradation.
  • Chemical Resistance: The tip is made of Polyphenylene sulfide (PPS), though highly acidic or basic solutions can erode the assembly over time.
  • Vibration Measurement: Monitoring dynamic radial vibration on fluid-film bearing machines.
  • Position Measurement: Tracking static axial (thrust) position or thermal expansion.
  • Speed and Phase Reference: Serving as a Keyphasor signal for speed measurement and phase triggering.
  • API 670 Compliance: The standard 5-meter system fully complies with American Petroleum Institute (API) 670 standards for accuracy and stability.
  • Connectors: Uses corrosion-resistant, gold-plated ClickLoc miniature coaxial connectors. These require only finger-tight torque and "click" to confirm a secure, vibration-resistant lock.
  • Cabling: Features a 75 triaxial, fluoroethylene propylene (FEP) insulated cable. The CableLoc design provides up to 330 N (75 lbf) of pull strength.
  • Interchangeability: Part of a fully interchangeable system; the probe can be used with any 3300 XL extension cable and Proximitor sensor without requiring bench calibration.
  • Output Signal: Provides an output voltage (typically 200 mV/mil or 7.87 mV/ m) directly proportional to the distance between the probe tip and the target material.
Description
The 330104-00-08-50-01-05 is a 3300 XL 8 mm Proximity Probe designed for precise vibration and displacement measurement in critical rotating machinery. The 330104-00-08-50-01-05 features an M10 x 1 threaded probe body with armored construction, providing excellent mechanical strength and resistance to vibration, abrasion, and harsh industrial conditions. With an unthreaded length of 0 mm and an overall case length of 80 mm, the 330104-00-08-50-01-05 is well-suited for installations requiring extended probe reach while maintaining stable and accurate measurement performance.

The 330104-00-08-50-01-05 is equipped with a 5.0-meter (16.4 feet) total cable length, enabling flexible installation across large machinery setups or where remote mounting is required. It utilizes a miniature coaxial ClickLoc connector with a connector protector, ensuring secure signal transmission while providing additional protection against environmental factors such as dust, moisture, and mechanical damage. The standard cable design of the 330104-00-08-50-01-05 ensures compatibility with a wide range of condition monitoring systems and maintains consistent signal integrity over extended distances.

This 330104-00-08-50-01-05 proximity probe is specifically designed for monitoring shaft vibration, axial displacement, and position in industrial equipment such as steam turbines, compressors, pumps, and large electric motors. The 330104-00-08-50-01-05 is ideal for addressing challenges such as long-distance signal transmission, equipment misalignment detection, and early fault identification in complex machinery layouts. By delivering accurate real-time data, the 330104-00-08-50-01-05 helps prevent unexpected failures, reduces maintenance costs, and supports predictive maintenance strategies in industries including power generation, oil and gas, and petrochemical processing.

In addition, the 330104-00-08-50-01-05 meets international certification standards including CSA, ATEX, and IECEx approvals. The 330104-00-08-50-01-05 is suitable for use in hazardous and explosive environments, ensuring safe, reliable, and compliant operation in demanding industrial applications.
Alternative Names
330104 00 08 50 01 05 330104-00-08-50-01-00 330104-00-08-50-01-CN 330104-00-08-50-11-05 330104-00-08-50-02-05 330104-00-08-10-01-05
Exceptional Service

Our Mission

  • 100% Satisfaction

    We believe expertise is priceless. With over 20 years of experience, and top engineers on staff, we can help you solve or avoid problems that threaten your business.
  • Trust Guaranteed

    Not only do we have a vast inventory, our team makes sure every piece of equipment is in working condition. Your purchases are also backed by our Warranty.
  • Expertise

    Time is money, especially when your equipment is down. We work quickly to get your equipment on its way so you can get it back up and running.

FAQS

The following is a list of questions commonly asked by our customers. Please contact us if you have a question about our process that is not answered below.
What are the primary application areas of the 3300 XL 8 mm probe?
The probe is widely used for vibration and position monitoring in fluid-film bearing machinery. It is also suitable for Keyphasor reference signals and speed measurement applications.
Does the 3300 XL 8 mm system comply with industry standards?
Yes. The standard 5-meter 3300 XL 8 mm system fully complies with the API 670 standard regarding mechanical configuration, linear measurement range, accuracy, and temperature stability.
What material is used for the 330104-00-08-50-01-05 probe housing?
The probe housing is built from AISI 303 or 304 stainless steel, ensuring corrosion resistance and robust mechanical reliability.

Product Browsing History