Features:
- Sensing Interface Between Rotating Machinery Targets and 3300 XL Condition Monitoring Systems
- Integrates Patented TipLoc Molding and 330 N CableLoc Technology with Armored M10 x 1 Construction
- Supports Standard and Optional FluidLoc Cable Configurations with CSA, ATEX, and IECEx Approvals
The 330104-00-09-90-02-00 operates as the 3300 XL 8 mm Proximity Probe in a machinery protection system, providing reliable non-contact displacement measurement to all monitors within the system. It continuously senses target surface motion and converts this into electrical signals distributed through the 9.0-meter (29.5-foot) standard cable and miniature coaxial ClickLoc connector to support steady state operation of all monitors and modules. Seamless signal transfer is standard with the 330104-00-09-90-02-00; however, using the optional FluidLoc cable option will prevent oil and other liquids from leaking out of the machine through the cable's interior. The 330104-00-09-90-02-00 has made improvements in several areas over previous probe designs in addition to incorporating the patented TipLoc molding method and 330 N (75 lbf) CableLoc pull strength within the 3300 XL probe body.
The 330104-00-09-90-02-00 provides essential measurement functions common to the entire monitoring path, and is a critical component of the machinery protection system, directly affecting the proper, normal operation of the overall monitor system. One 330104-00-09-90-02-00 probe is required per measurement point depending on the desired monitoring coverage. The 330104-00-09-90-02-00 features an unthreaded length of 0 mm, overall case length of 90 mm, and M10 x 1 thread with armor, occupying only a single threaded mounting position in the designated probe housing location.
For fluid-exposed machinery applications, the 3300 system supports the optional FluidLoc cable configuration with the 330104-00-09-90-02-00. In addition to standard cable operation, the FluidLoc option also performs internal sealing against oil and liquid ingress. The 330104-00-09-90-02-00 with FluidLoc executes protection using the internal cable construction specified in the probe options. Using this method, the FluidLoc system continually prevents fluid migration through the cable interior. If the system detects that standard cable sealing is no longer providing adequate environmental protection (outside configured tolerance levels), the FluidLoc design maintains barrier integrity and preserves signal quality for the monitoring system.
The 330104-00-09-90-02-00 Bently Nevada 3300 XL 8 mm Proximity Probe may still be available for purchase and support from Apter Power beyond End-Of-Life (EOL) by the manufacturer (OEM).
Bently Nevada 330104-00-09-90-02-00 3300 XL 8 mm Proximity Probe Manuals,Datasheets,Link
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
Bently Nevada 330104-00-09-90-02-00 3300 XL 8 mm Proximity Probe Specs
General
- Manufacturer Bently Nevada
- Model 330104-00-09-90-02-00
- Condition New Original ready stock
- Product Family 330104-00-09-50-02-00,330104-00-09-90-01-00
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
- Radial Vibration Monitoring: Measures shaft dynamic motion within fluid-film bearings to diagnose imbalances or misalignments.
- Axial Position Monitoring: Tracks the axial displacement of thrust collars to prevent catastrophic internal machine contact.
- Keyphasor and Speed Measurements: Provides a once-per-turn voltage pulse for timing phase references and tracking rotational speed.
- Target Machinery Application: Deployed inside critical equipment like steam and gas turbines, centrifugal compressors, pumps, generators, and electric motors.
- Linear Range: 2.0 mm (80 mils), starting at approximately 0.25 mm (10 mils) from the target surface.
- Scale Factor: 7.87 V/mm (200 mV/mil) when paired with a matching 3300 XL Proximitor sensor.
- Linearity: Deviation from Best Fit Straight Line stays within ±0.038 mm (±1.5 mil) across standard operating temperatures.
- Frequency Response: 0 to 10 kHz (+0, -3 dB typical), allowing precise capture of high-speed vibration harmonics.
- Interchangeability: 100% component interchangeability. Eliminates the need to bench-calibrate individual combinations of probes, extension cables, and Proximitor sensors.
- Structural Integrity: Patented TipLoc molding secures the polyphenylene sulfide (PPS) tip to the probe body. Patented CableLoc design provides 330 N (75 lbf) of pull strength.
- Probe Operating Temperature: Rated for a continuous temperature spectrum of -51 °C to +177 °C (-60 °F to +351 °F).
- Relative Humidity: Completely sealed against 100% condensing humidity, ensuring moisture does not degrade signal transfer.
- Pressure Sealing: Designed to seal differential pressures between the probe tip and case using an internal Viton O-ring.
- Chemical Resistance: The tip consists of polyphenylene sulfide (PPS) plastic and the body features AISI 304 stainless steel, providing robust resistance to corrosive lubricants, turbine oils, and chemical vapors.
- RFI and EMI Immunity: The system exhibits total immunity to radio frequency interference, satisfying European CE mark standards without necessitating specialized shielded conduits.