Features:
- Interface Between the Proximitor Probe and 3500 Monitoring System
- Combines Capability of Signal Conditioning with Extended Cable Length Support
- Operates in Conjunction with the 3300 XL Series Proximity Transducer System
The 330180-92-00 operates as the 3300 XL Proximitor Sensor, providing reliable signal conditioning and conversion for eddy current proximity probe measurements. It continuously processes incoming signals from the proximity probe and converts them into standardized displacement measurements for machinery monitoring applications. The 330180-92-00 features a total system length of 9.0 meters (29.5 feet), providing extended cable reach for installations where the monitoring equipment must be positioned at significant distances from the measurement point. No mounting hardware is included with the 330180-92-00, offering flexibility for custom installation configurations based on specific application requirements. The 330180-92-00 requires no agency approval, making it suitable for general industrial applications where specialized hazardous area certifications are not mandated.
The 330180-92-00 provides essential signal conditioning functions common to the entire proximity transducer system, and is a critical component of the vibration monitoring path, directly affecting the accuracy and reliability of displacement measurements for rotating machinery. One 330180-92-00 Proximitor Sensor is required per measurement channel, interfacing between the probe tip and the monitoring system backplane. The 330180-92-00 occupies minimal installation space and is typically mounted in standard industrial enclosures or directly on the machine frame depending on environmental conditions.
For extended reach applications, the 330180-92-00 with its 9.0-meter system length eliminates the need for intermediate junction boxes in many installations, reducing potential points of signal degradation and simplifying system architecture. In addition to standard signal conditioning operation, the 330180-92-00 performs continuous linearization and temperature compensation. The 330180-92-00 signal conditioning circuitry executes accurate displacement conversion using the internal electronics specified in the 3300 XL system specifications. Using this method, the 330180-92-00 continually processes the raw eddy current signal and converts it to a standardized output compatible with Bently Nevada monitoring systems. If the system detects signal anomalies or out-of-range conditions, it will automatically flag the measurement channel and communicate status to the host monitoring system.
The 330180-92-00 Bently Nevada 3300 XL Proximitor Sensor may still be available for purchase and support from Apter Power beyond End-Of-Life (EOL) by the manufacturer (OEM).
Bently Nevada 330180-92-00 3300 XL Proximitor Sensor Manuals,Datasheets,Link
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
Bently Nevada 330180-92-00 3300 XL Proximitor Sensor Specs
General
- Manufacturer Bently Nevada
- Model 330180-92-00
- Condition New Original ready stock
- Product Family 330180-91-00,330180-90-00,330180-92-05
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
- Vibration Measurement: Monitoring radial vibration on fluid-film bearing machines.
- Position Measurement: Tracking axial (thrust) position and differential expansion in turbines and compressors.
- Speed & Phase Reference: Serving as a Keyphasor® or tachometer for speed measurements and phase timing.
- High-Density Installations: Designed for space-constrained environments, supporting high-density DIN-rail or traditional panel mounting.
- Calibration: Factory-calibrated by default to AISI 4140 steel. Use with other materials requires custom factory calibration or external compensation in the monitoring system.
- Power Requirements: Requires a supply of -17.5 Vdc to -26 Vdc (typically -24 Vdc).
- Interchangeability: Components (probe, cable, and sensor) are fully interchangeable without needing bench calibration, provided they are within the same system length (e.g., 9-meter sensor with a 9-meter total cable/probe length).
- Operating Temperature:-51 °C to +100 °C (-60 °F to +212 °F)
- Storage Temperature:-51 °C to +105 °C (-60 °F to +221 °F)
- Relative Humidity:100% condensing, non-submerged (when connectors are protected)