Features:
- 4.0 m (13.1 ft) FluidLoc extension cable for the 3300 XL 8 mm Proximity Transducer System
- FluidLoc construction helps prevent oil and other liquids from migrating through the cable interior
- Uses corrosion-resistant, gold-plated ClickLoc connectors
The Bently Nevada 330130-040-10-00 is a 4.0 m FluidLoc extension cable for the 3300 XL 8 mm Proximity Transducer System. It connects a compatible proximity probe to the corresponding 3300 XL Proximitor Sensor. The probe and extension cable lengths must add up to the total electrical length specified for the Proximitor Sensor.
The cable uses corrosion-resistant, gold-plated ClickLoc connectors. Ordering option 10 specifies FluidLoc cable without armor and without a pre-installed connector protector.
The cable length is 4.0 m (13.1 ft). Nominal extension-cable resistance is 0.88 ± 0.13 Ω for RCORE and 0.26 ± 0.05 Ω for RJACKET. The standard extension-cable operating and storage temperature range is -52°C to +177°C (-62°F to +350°F).
No official EOL or discontinuation notice for 330130-040-10-00 was identified in the reviewed Bently Nevada/Baker Hughes documentation. Exact OEM lifecycle status should be confirmed with Bently Nevada.
Bently Nevada 330130-040-10-00 3300 XL 8 mm Extension Cable Manuals, Datasheets
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
Bently Nevada 330130-040-10-00 3300 XL 8 mm Extension Cable Specs
General
- Manufacturer Bently Nevada
- Model 330130-040-10-00
- Condition New Original ready stock
- Product Family 3300 XL 8 mm Proximity Transducer System
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
- Used as an extension-cable component in a compatible 3300 XL 8 mm Proximity Transducer System.
- When installed as part of a complete compatible 3300 XL 8 mm system, the system can measure static position and dynamic vibration. The extension cable itself is not a measuring sensor.
- The 330130-040-10-00 provides the extension-cable connection between a compatible probe and the corresponding 3300 XL Proximitor Sensor.
- As part of a complete 3300 XL 8 mm system, it supports static position and dynamic vibration measurements.
- Complete systems may also support Keyphasor reference and speed measurements when correctly configured.
- The extension cable does not independently measure vibration, generate alarms or initiate machinery trips.
- 3300 XL 8 mm components are electrically and physically interchangeable with non-XL 3300-series 5 mm and 8 mm system components.
- When XL and non-XL 3300-series components are mixed, system performance is limited to the specifications of the non-XL 3300 5 mm and 8 mm system.
- The probe length and extension-cable length must add up to the total electrical length specified for the selected Proximitor Sensor.
- Compatibility with 7200 or 25 mm transducer systems is not established by the 3300 XL 8 mm system datasheet.