Features:
- Fourteen monitor-module positions in a full-size 19-inch EIA frame.
- Dedicated left-side locations for rack power and interface hardware.
- CE configuration identified by the final ordering-code position.
3500/05-01-02-00-00-01 establishes the mechanical backbone that keeps 3500 monitoring modules and power supplies in one communicating rack.
Its rack-mount option fixes the access direction at the rear, which determines how field wiring and I/O assemblies are approached after mounting.
The complete five-position option string separates this item from smaller racks and from panel- or bulkhead-mounted configurations.
The Bently Nevada 3500/05-01-02-00-00-01 System Rack is listed as Active / Available from OEM. Apter Power supports document and configuration review.
Bently Nevada 3500/05-01-02-00-00-01 System Rack Manuals,Datasheets,Link
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
Slot allocation and rear-access arrangement
- Left Rack Area: The power supplies and Rack Interface Module use the dedicated positions at the far left.
- Monitor Field: Fourteen remaining positions accept the selected 3500 monitoring modules.
- Rear Boundary: The rack-mount construction places I/O modules and wiring access behind the frame.
- Planning Result: Cabinet depth must accommodate both the 19-inch frame and rear service space.
Cabinet-fit and service-access constraints
- Frame Standard: The full-size chassis installs in a 19-inch EIA rack.
- Mount Selection: Option 02 fixes rack mounting rather than panel or bulkhead hardware.
- Wiring Access: Rear clearance is required for I/O assemblies and field connections.
- Depth Reference: The standard rack depth is 349.25 mm; internal barriers increase it to 422.91 mm.
Ordering positions that define this rack
- 01 Rack Size: Selects the full-size 19-inch frame with fourteen module slots.
- 02 Mounting: Assigns the EIA rack-mount arrangement and rear access direction.
- 00 / 00 Fields: Add neither a separate agency approval nor a reserved option.
- Final 01: Carries the CE compliance selection independently of the agency field.
Separate approval and European option fields
- Agency Position: Code 00 means this order string has no separate agency-approval option.
- European Position: Code 01 selects CE compliance.
- Identification Rule: The two positions describe different choices and must not be merged.
- Verification Point: Compare both fields with the required installation documentation.