- Series 90 five-phase stepping motor
- Listed by Berger Lahr for servo-step operation with the WD5-008
- Five-wire motor interface for a 325 V DC link system
VRDM 5910/50 LVC is a Berger Lahr Series 90 five-phase stepping motor designed for servo-step operation in a WD5 motion-control system.
Berger Lahr documentation lists VRDM 5910/50 LVC as a compatible servo-step motor for the WD5-008 power drive. The drive connects a positioning controller, such as a PLC, to the motor and processes rotation-monitor feedback.
Before installation or replacement, confirm the complete LVC suffix, five-wire motor connection, 325 V DC link compatibility, feedback interface, mechanical mounting and shaft coupling.
Availability, condition, price, and shipping time for VRDM 5910/50 LVC are confirmed during quotation.
Berger Lahr VRDM 5910/50 LVC 5-Phase Stepping Motor Manuals, Datasheets, Links
Important Notice: Other accessories, manuals, motor cables, feedback cables, drives, connectors, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
- Use with the WD5-008 power-drive platform documented by Berger Lahr
- Preserve the LVC servo-step suffix and rotation-sensor connection
- Verify the nameplate current and drive current setting before energization
- Rotation-sensor feedback supports servo-step operation
- The compatible drive monitors contouring error through the sensor interface
- Feedback wiring must remain isolated and correctly screened
- Match the complete VRDM 5910/50 LVC designation
- Confirm shaft, connector, cable and sensor configuration from the installed motor
- Do not substitute an LWC motor without an engineering review
- Servo-step positioning systems driven by a Berger Lahr WD5-008
- Five-phase motion axes requiring rotation-sensor feedback
- Legacy machine axes that use the Series 90 VRDM motor format