Features:
- Provides intrinsically safe field termination for compatible DeltaV M-series I/O cards.
- Supports approved analog input or output circuits selected for the installed IS module.
- Uses model-specific terminal keying and wiring for the documented hazardous-area arrangement.
The current ordering configuration is KJ4110X1-BA1, a DeltaV M-series intrinsically safe terminal block for analog I/O.
It provides field termination between approved intrinsically safe analog input or output circuits and the matching DeltaV M-series I/O module.
Before replacement, match the installed card, terminal keying, channel wiring, entity parameters and hazardous-area approvals to the project documentation.
Availability is subject to Apter Power inventory and sourcing confirmation.
Verified resources for Emerson KJ4110X1-BA1:
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
- Terminates intrinsically safe analog-input field loops for compatible DeltaV M-series cards.
- Supports approved analog-output wiring to compatible hazardous-area field devices.
- Provides replaceable field termination while retaining the existing DeltaV carrier and I/O architecture.
- Works with the compatible DeltaV M-series intrinsic-safety I/O modules documented for this terminal block.
- Must match the installed analog input or output card rather than a standard non-IS module.
- Requires the same terminal keying and field-circuit approval as the existing KJ4110X1-BA1 assembly.
- Mounts on the approved DeltaV M-series carrier for intrinsic-safety I/O service.
- Accepts project field wiring at the documented terminal positions and polarity.
- Requires power isolation and verification of the hazardous-area loop calculation before replacement.
- Forms part of the approved intrinsic-safety installation only when used with specified modules and wiring.
- Depends on the applicable project and location certification markings for hazardous-area deployment.
- Requires the original entity parameters and installation instructions to be preserved during service.