Features:
- Provides 32 high-density 24 VDC dry-contact inputs.
- Includes the Series 2 Plus 32-channel DI terminal block.
- Uses E3 keying and requires DeltaV v13.3.1 or later.
The selected configuration is VE4001S2T2B6, the 32-channel DeltaV M-Series Discrete Input Plus card and Series 2 Plus terminal-block assembly.
It concentrates dry-contact field status into the Traditional I/O subsystem while retaining card-level power, error and diagnostic reporting.
Before commissioning, verify software revision, M-Series controller and carrier, E3 keying, terminal-block identity, channel wiring and the 24 VDC contact-wetting design.
Availability is subject to Apter Power inventory and sourcing confirmation.
Verified resources for Emerson VE4001S2T2B6:
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
- Collects 32 dry-contact equipment-status inputs in a DeltaV M-Series cabinet.
- Provides high-density 24 VDC discrete monitoring for process and utility systems.
- Replaces the same Series 2 Plus B6 card-and-terminal-block configuration during maintenance.
- Power and internal-error indicators are provided on the Traditional I/O card housing.
- DeltaV hardware alerts identify card integrity conditions through the controller diagnostics environment.
- Channel troubleshooting must separate contact-wetting, field-wiring and card faults before replacement.
- The common I/O operating range is -40 to 70°C.
- Storage is permitted from -40 to 85°C with 5 to 95% non-condensing humidity.
- The IP20 assembly uses conformal coating and components selected for ISA Class G3 contaminants.
- The card is part of the documented DeltaV M-Series Traditional I/O platform.
- System approvals depend on the installed controller, carrier, enclosure and terminal-block configuration.
- Verify the actual product label and project certification requirements before hazardous-area use.