Features:
- Provides terminal hardware for a 32-channel high-side output assembly.
- Matches the 5X00500G01 24 VDC output electronics.
- Integrates with the 5X00497G01 Ovation termination base.
The current ordering configuration is 1X00691H01, the exact terminal hardware used in the documented 32-channel high-side output arrangement.
It provides the field-termination interface between the 5X00500G01 output electronics and the 5X00497G01 base assembly.
Before installation, match all three part numbers, connector keying and the 24 VDC field-load design shown in the project documentation.
Availability is subject to Apter Power inventory and sourcing confirmation.
Verified resources for Emerson 1X00691H01:
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
- Terminates field wiring for an Ovation 32-channel 24 VDC high-side output assembly.
- Supports compact cabinet output circuits built around the 5X00500G01 electronics module.
- Provides a matched service replacement for installations retaining the 5X00497G01 base.
- The terminal hardware is associated with 5X00500G01 high-side output electronics.
- The documented base for the assembly is 5X00497G01.
- Compatibility depends on the complete terminal, base and electronics combination rather than connector appearance.
- Match the terminal keying and field connector before placing the hardware on the base.
- Preserve channel numbering and load-return routing from the project drawings.
- Inspect the mating base contacts before reseating the replacement terminal hardware.
- The terminal hardware must remain inside the environmental limits of the complete Ovation I/O assembly.
- Cabinet ventilation and contamination control apply at the installed base location.
- Storage and handling must prevent moisture and connector damage before commissioning.