Features:
- Includes one pH/ORP/ISE measurement board in the dual-channel 1056 platform.
- Operates from 115/230 V AC and communicates through the HART option.
- Uses a NEMA 4X/IP65 enclosure suitable for panel, wall or pipe mounting.
The complete suffix identifies power, installed measurement hardware and communication option.
It processes electrochemical sensor signals for local indication and plant-system output.
Sensor wiring and analyzer configuration must be checked together before calibration.
Apter Power can review sourcing, documentation and system matching for 1056-01-22-38-HT.
Verified resources for Emerson Rosemount 1056-01-22-38-HT:
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
- Water-treatment skids can display and transmit continuous pH or ORP measurements.
- Chemical dosing loops use the analyzer value as an input to supervisory or control logic.
- Utility systems can place the NEMA-rated enclosure near sampling equipment while retaining HART access.
- The HT option provides HART communication for the configured analyzer.
- HART data shares the supported analog communication path with the process measurement.
- Host addressing and loop conditions must match the plant asset-management design.
- Measurement input one is assigned to pH, ORP or ion-selective-electrode service.
- The second measurement position is not populated in the 38 execution.
- Menu settings define sensor type, temperature compensation, scaling and alarm behavior.
- Local messages support sensor, calibration and analyzer fault investigation.
- Process trends can reveal coating, reference degradation or unstable sample conditions.
- HART access allows supported device information to be reviewed without opening the enclosure.