Features:
- Distributes one 24 V DC source through six separately fused current paths.
- Indicates every active path with its own LED and reports a fuse fault with a flashing ERR indicator.
- Provides a floating d28-d30 changeover contact for the combined monitored-fuse condition.
HIMA F7105A organizes six protected outgoing feeds without combining their fuse status into one invisible wiring branch.
The front indication shows which path is affected, while the relay contact carries one cabinet-level condition for the monitored paths.
Parallel supply terminals z2 and z4 are part of the input arrangement; each outgoing path still retains its own fuse.
The HIMA F7105A 6-Channel Fused Current Distribution Module is listed as Discontinued / Obsolete by OEM; Apter Power can assist with exact-model documentation and matching.
HIMA F7105A 6-Channel Fused Current Distribution Module Manuals,Datasheets,Link
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
Six separately protected feeds
- Incoming paths: Terminals d6 through d16 accept the six path supplies.
- Fuse boundary: Every outgoing path has its own time-delay fuse.
- Load destination: The protected paths feed the connected module subframes.
- Parallel input: Terminals z2 and z4 allow parallel 24 V DC supply connection.
Channel and aggregate fault reporting
- Normal path: The related front LED is illuminated while its monitored fuse is intact.
- Blown fuse: The affected channel LED and the ERR LED flash.
- Relay action: A monitored fuse fault opens the d28-d30 contact.
- Unused path: An unconnected path is not included in the aggregate fault condition.
Visual status and external contact
- Contact form: The output is a floating changeover contact.
- Connection: The aggregate output is assigned to d28-d30.
- Voltage limit: The relay path is rated up to 30 V AC or DC.
- Current limit: The switching-current ceiling is 4 A.
Electrical and environmental boundaries
- Nominal source: The module operates from 24 V DC.
- Tolerance: The accepted source range is -15% to +20%.
- Electronics load: Internal module consumption is 65 mA.
- Ambient: The documented operating boundary is -25 to +70 °C.