Features:
- Designed for GE Mark VI Wind Control systems with stable 24 VDC logic power support.
- Operates with low power consumption typically below 10 W for efficient system integration.
- Supports industrial temperature and humidity ranges suitable for wind turbine environments.
The General Electric IS200WEORG1ACD is a Mark VI series wind turbine control board used in GE Wind Control systems. It is designed to support stable system logic functions with a 24 VDC power input. The IS200WEORG1ACD focuses on reliable integration within industrial wind energy control platforms.
In operation, the IS200WEORG1ACD maintains low power consumption, typically under 10 W. This helps reduce overall system load while supporting continuous operation in control cabinets. The IS200WEORG1ACD is suitable for applications where stable and efficient performance is required.
The IS200WEORG1ACD is built to operate in industrial environments with temperatures from -25°C to +70°C and humidity from 5% to 95% non-condensing. It uses a normal PCB coating for standard protection. Overall, the IS200WEORG1ACD is a practical control solution within the Mark VI wind turbine system architecture.
The IS200WEORG1ACD General Electric Wind Turbine Board may still be available for purchase and support from Apter Power beyond End-Of-Life (EOL) by the manufacturer (OEM).
General Electric IS200WEORG1ACD Wind Turbine Board Manuals,Datasheets,Link
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
General Electric IS200WEORG1ACD Wind Turbine Board Specs
General
- Manufacturer GE / Bently Nevada
- Model IS200WEORG1ACD
- Condition New Original ready stock
- Product Family IS200WEORG1A,IS200WEORG1ABD,IS200WEORG1ABC
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
- Static Electricity Protection: Wear an anti-static wrist strap before operation to prevent damage to precision components from instantaneous high voltage.
- Power-Off Operation: Ensure the cabinet is completely powered off and locked. Never insert or remove circuit boards while the power is on.
- Precise Alignment: Smoothly push the cabinet in along the guide rails, ensuring the backplane pins and slots are fully aligned, avoiding misalignment.
- Reinforcement and Locking: Tighten the panel screws to enhance shock resistance and confirm that all terminals have good contact.
- Temperature Control: The operating environment must be maintained within the standard cabin temperature range to prevent logic errors caused by overheating.
- Humidity Control: The cabinet should have good sealing and dehumidification functions to prevent condensation from causing short circuits.
- Dust and Corrosion Protection: In areas with high salt spray or dust levels, regularly check the coating integrity to prevent circuit corrosion.
- Vibration Suppression: The installation location should avoid high-frequency vibration sources to ensure stable signal transmission under complex operating conditions.
- Converter Control: Used to regulate the voltage and frequency generated by the wind turbine generator to ensure stable power output.
- Yaw Adjustment: Drives the nacelle steering mechanism, ensuring the rotor is always precisely aligned with the wind direction to maximize wind capture.
- Pitch Management: Adjusts blade angle in real time to protect the unit and maintain rated power in strong winds.
- Logic Monitoring: As the core unit of the main control system, coordinates communication and fault diagnosis between various subsystems of the wind turbine.