Features:
- Provides eight Form-A output contacts for Universal Relay control functions.
- Uses the unmonitored voltage/current output configuration documented for code 67.
- Integrates with the host UR relay module map and programmable logic.
UR67H denotes the code-67 output configuration within the GE Universal Relay modular architecture.
Its eight normally open Form-A contacts transfer protection or control decisions to external panel circuits.
Confirm host model, slot, firmware, contact duty, terminal plan, and FlexLogic assignments before replacement.
Availability is subject to Apter Power inventory and sourcing confirmation.
Verified resources for GE Vernova UR67H:
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
- Operate auxiliary trip, alarm, and interlock circuits from a compatible Universal Relay.
- Interface UR protection logic with external relays or control-system discrete inputs.
- Restore a code-67 module position after the original slot and terminal map are verified.
- Eight independent Form-A contacts execute the discrete commands assigned by the host relay logic.
- Output-state indication is derived from the relay logic because this variant lacks circuit voltage/current monitoring.
- External circuit supervision must be engineered separately where the application requires monitored continuity.
- Confirm every output with isolated test loads before reconnecting breaker trip or close circuits.
- Investigate coil suppression, contact inrush, and external fuse coordination after any output failure.
- Use the UR event and logic records to distinguish command conditions from field-circuit faults.
- Apply the isolation and lockout procedure for all auxiliary sources connected to the output terminals.
- Respect the contact ratings and pollution, insulation, and enclosure limits in the applicable UR manual.
- Complete the utility or plant protection test plan after module replacement or relay reconfiguration.