Features:
- Adds eight programmable contact inputs to a compatible Universal Relay.
- Provides four Form-A output contacts for protection and control logic.
- Uses the 6T execution without output-circuit monitoring.
The 6TH model marking corresponds to the 6T I/O arrangement shown on the assembly label.
It brings external equipment states into the relay and issues hardwired actions from FlexLogic or protection elements.
The settings file and installed slot must define this exact contact configuration before the relay is returned to service.
Apter Power can review sourcing, documentation and system matching for UR6TH.
Verified resources for GE UR6TH:
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
- Motor and feeder relays collect breaker, isolator and permissive contacts through the eight inputs.
- Protection schemes use the Form-A outputs for trip, close permissive or annunciation circuits.
- Retrofit work can restore a failed I/O position without replacing the complete Universal Relay chassis.
- Eight programmable inputs report field contact states to protection and automation logic.
- Output states can be viewed in relay diagnostics even though external current is not monitored by this option.
- Event recording can associate digital transitions with protection-element operation in the host relay.
- The host relay supervises module presence and mapped logic operation.
- This 6T execution does not verify current through the external Form-A output circuit.
- Trip-circuit supervision therefore requires separate relay logic or a different monitored-output option.
- The module belongs to the GE Multilin Universal Relay hardware platform.
- Firmware and order code must support the 6T arrangement in the selected chassis slot.
- Terminal wiring and settings cannot be copied from a different UR I/O code without comparison.