Features:
- Paired active and backup controller operation
- Sixty-four megabytes of user memory
- Embedded serial interfaces for service communications
IC695CRU320 monitors the redundancy relationship and coordinates which controller owns the application outputs.
The backup side follows the active application state so a qualified role transfer can occur under the engineered redundancy rules.
Controller status and redundancy diagnostics help operators distinguish a local CPU fault from a synchronization or communications condition.
The General Electric IC695CRU320 PACSystems RX3i Redundancy CPU is supported for pricing and official manufacturer documentation access through Apter Power.
General Electric IC695CRU320 Manuals, Datasheets, Links
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
IC695CRU320 redundancy operation guidance
- Active controller: The active side executes the application and controls the configured outputs.
- Backup controller: The backup side receives synchronized state and remains prepared for a qualified transfer.
- Role transfer: Switchover behavior follows the configured redundancy conditions and system health.
- Output ownership: Only the qualified active IC695CRU320 side owns the configured outputs while the partner remains in its backup role.
IC695CRU320 synchronization guidance
- Project match: Both CPUs require compatible hardware configuration and application content.
- Firmware alignment: The paired controllers must use supported firmware combinations.
- State transfer: Redundancy links carry the operating state required by the backup.
- Rejoin sequence: A serviced IC695CRU320 must complete the configured synchronization process before it is accepted as the standby side.
IC695CRU320 diagnostics guidance
- Controller status: CPU indicators and fault tables identify local operating conditions.
- Pair status: Redundancy diagnostics report synchronization and role information.
- Recovery: A repaired side must rejoin and synchronize before it can serve as backup.
- Link health: IC695CRU320 redundancy-link status helps separate a controller fault from a failed or interrupted synchronization path.
IC695CRU320 applications guidance
- Continuous processes: IC695CRU320 can support process lines where controller availability must be maintained through a single controller fault.
- Utility systems: IC695CRU320 can coordinate redundant control for water, energy, and infrastructure equipment.
- Production lines: IC695CRU320 can protect coordinated machine sequences from selected primary-controller outages.
- Batch continuity: IC695CRU320 can maintain the engineered controller role through a qualified transfer in batch and process operations.