- RX3i rack-based controller for cyclic PROFINET I/O exchange
- Supports Emerson and compatible third-party PROFINET devices
- Multiple controller modules can segment large RX3i PROFINET architectures
IC695PNC001 is a General Electric PACSystems RX3i PROFINET Controller for distributed industrial I/O networks.
The module operates in the host RX3i CPU rack, manages configured PROFINET devices, and returns field inputs while applying controller outputs across the network.
Before installation or replacement, verify the complete Axxx or Bxxx suffix, firmware compatibility, CPU release, GSDML files, device names, IP plan, media, topology, and stored hardware configuration.
Availability, condition, price, and shipping time for IC695PNC001 are confirmed during quotation.
General Electric IC695PNC001 PACSystems RX3i PROFINET Controller Manuals, Datasheets, Links
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
- The module can organize compatible PROFINET devices in line, star, or ring topologies
- Copper and fiber media can be selected for the documented network design
- Device names and IP parameters must match the PAC Machine Edition configuration
- Media Redundancy Protocol operation depends on the installed hardware suffix and firmware
- A configurable MRP Ring Domain UUID is available on supported Bxxx firmware
- Remote MRP Manager faults can be enabled with supported Bxxx firmware and CPU releases
- PROFINET process alarms can trigger logic-block execution on supported Bxxx releases
- Asynchronous RDO read and write operations require compatible PNC and CPU firmware
- Station, device, and network faults are reported to the host RX3i control system
- Distributed I/O for mission-critical discrete automation
- Process-control systems using PACSystems PROFINET remote I/O
- Industrial networks combining PACSystems and compatible third-party PROFINET devices