Features:
- Collects twelve 24 VDC input signals in a compact Micro 20 controller.
- Operates eight compatible field circuits through isolated relay contacts.
- Accepts as many as four expansion modules for later station growth.
General Electric IC200UDR020 concentrates a practical input-to-output ratio in a small PLC, fitting panels where discrete sensing exceeds the number of commanded loads.
Relay outputs give the machine designer freedom to separate load supplies, provided every contact remains within its voltage, current and inrush limits.
Its larger Micro-series memory, high-speed resources and motion instruction set can support coordinated sequences that extend beyond simple on/off control.
The General Electric IC200UDR020 VersaMax Micro 20 PLC may still be available for purchase and support from Apter Power beyond End-Of-Life (EOL) by the manufacturer (OEM).
General Electric IC200UDR020 VersaMax Micro 20 PLC Manuals,Datasheets,Link
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
Discrete Control Arrangement
- Input Balance: Twelve sensing points serve applications with more feedback than output commands.
- Contact Isolation: Eight relay channels provide galvanic separation between logic and compatible loads.
- Supply Basis: A 24 VDC source powers the controller independently of the switched circuits.
- Service Check: Terminal commons and external protective devices should be traced before replacement.
Integrated Fast Functions
- Counter Rate: Up to four high-speed counters can process supported signals at 100 kHz.
- Pulse Generation: Four channels are available for pulse or PWM commands up to 65 kHz.
- Position Logic: Find Home, Jog, Ramp and blended movement instructions support coordinated mechanisms.
- Signal Quality: Shielding, reference integrity and input waveform shape affect reliable high-speed operation.
Flexible Device Connections
- Primary Interface: The standard RS232 port provides a direct programming or serial path.
- Second Channel: RS232, RS485, USB or Ethernet options can adapt the other communication position.
- Protocol Setup: Baud rate, framing and node parameters must agree with the connected device.
- Commissioning: Keeping one channel available for engineering access simplifies online diagnostics.
Compact Automation Uses
- Assembly Stations: Twelve sensors and eight relay commands suit guarded, interlocked work cells.
- Pump Panels: Isolated contacts can operate appropriately rated contactors or control relays.
- Material Handling: High-speed inputs and motion commands assist indexing and position-based sequences.
- Panel Retrofits: The 24 VDC supply format fits many existing low-voltage control cabinets.