Features:
- Integrates thirteen 12 VDC inputs and ten relay outputs.
- Accepts voltage or current on two analog inputs and one analog output.
- Connects serial devices through separate RS-232 and RS-485 ports.
The mixed-I/O arrangement reduces the number of separate modules needed for a small controller with relays and process signals.
Bidirectional input logic provides a practical path for matching the polarity convention already used by installed switches and sensors.
Onboard flash memory, a real-time clock and expansion support give the unit room for sequencing, retained data and future I/O growth.
The General Electric IC200UAL004 VersaMax Micro PLC may still be available for purchase and support from Apter Power beyond End-Of-Life (EOL) by the manufacturer (OEM).
General Electric IC200UAL004 VersaMax Micro PLC Manuals,Datasheets,Link
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
Bidirectional Sensing
- Point Count: Thirteen discrete channels accept 12 VDC field signals.
- Logic Choice: Input commons can be wired for positive or negative logic.
- Counter Modes: DC points support Type A and Type B high-speed arrangements.
- Device Power: The controller provides a limited +12 VDC user supply for sensors.
Contact Output Layout
- Contact Type: Ten outputs use normally open Form A relays.
- Load Source: AC or DC output circuits require external field power.
- Isolation: Relay contacts separate the controller from switched load voltage.
- Branch Safety: External fusing should be fitted for the connected loads.
Integrated Measurement Channels
- Inputs: Two differential channels acquire voltage or current signals.
- Output: One single-ended channel drives an analog command.
- Ranges: Select 0-10 V, 0-20 mA or 4-20 mA as required.
- Reference: Analog circuitry is non-isolated and shares the controller reference.
Embedded PLC Functions
- Programming: Ladder Diagram and Instruction List logic are supported.
- Retention: Flash stores the application and configuration.
- Timing: A real-time clock supports scheduled operations.
- Expansion: Four compatible expansion units may follow the controller.