Features:
- Ten module positions are provided in the coated chassis.
- The chassis is rated for 13 amp system hardware.
- The full TK code identifies the coated Honeywell configuration.
TK-FXX102 appears in Honeywell chassis listings beside different rack sizes and coating variants, making the complete catalog identity essential.
Its ten-slot frame supplies the mounting structure for the control and I/O modules chosen for the supported system architecture.
The 13 amp rating places this chassis in the group accepted by Honeywell's mechanically keyed chassis-adapter arrangement.
The Honeywell TK-FXX102 10-Slot 13 Amp Coated Chassis is listed as Active / Available from OEM. Contact Apter Power for official documentation and system matching.
Honeywell TK-FXX102 10-Slot 13 Amp Coated Chassis Manuals, Datasheets, Links
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
Electrical class identification
- Rated group: TK-FXX102 is listed among Honeywell 13 amp chassis.
- Earlier hardware: Previous chassis versions in the adapter documentation were rated for 10 amps.
- Interlock purpose: Mechanical keying prevents the adapter from fitting an incompatible earlier chassis.
- Code control: The complete catalog number must be checked before selecting power-system hardware.
Redundant-power hardware relationship
- Compatibility: The chassis adapter documentation explicitly includes TK-FXX102.
- Location: The adapter installs at the left side of the supported chassis.
- Slot use: The adapter does not consume one of the module positions.
- Selection boundary: Only the chassis codes named in the compatibility list are accepted.
Catalog-code distinctions
- Coating: The TK-FXX102 ordering entry identifies a coated chassis.
- Capacity: Its ten-slot format differs from 7-, 13-, and 17-slot chassis entries.
- Prefix: The TK designation separates this configuration from uncoated TC-series listings.
- Replacement review: Coating and slot count should both match the installed label.
Module-frame planning
- Positions: Ten slots are available for the modules defined by the supported architecture.
- Chassis role: The frame provides mechanical mounting and backplane alignment for system hardware.
- Hardware scope: Module compatibility is determined by the applicable Honeywell system documentation.
- Order verification: TK-FXX102 should not be substituted by a neighboring rack code solely because the size appears similar.