- Use FCP270 only for its documented field control processor 270 function
- Confirm the exact module identity, companion hardware and software compatibility before replacement
- Preserve wiring, network or fieldbus configuration, diagnostics and redundancy state before removal
FCP270 is a Foxboro field control processor 270 for the Foxboro DCS platform.
Foxboro FCP270, official module order number P0917YZ, is a distributed, optionally fault-tolerant controller for regulatory, logic, timing and sequential process control.
Before installation or replacement, verify the complete nameplate, compatible hardware, network or field wiring, saved configuration, software release and commissioning plan.
Availability, condition, price, and shipping time for FCP270 are confirmed during quotation.
Foxboro FCP270 Field Control Processor 270 Manuals, Datasheets, Links
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
- Use up to 4,000 control blocks within the approved control strategy
- Keep the block-processing load within 10,000 blocks per second
- Use a 50 ms or longer block processing cycle according to the application
- Connect supported 200 Series FBMs over the 2 Mbps Module Fieldbus
- Use the documented 268 kbps path for supported 100 Series FBMs
- Apply FEM100 expansion only within the published capacity and topology
- Install the controller pair in the documented dedicated adjacent slots
- Preserve partner roles, control-network links and synchronized databases
- Prove partner transfer and control continuity under an approved test procedure
- Regulatory, logic, timing and sequential process control
- Distributed data acquisition, alarm detection and notification
- Fault-tolerant control of Foxboro 200 Series and supported 100 Series FBMs