- Terminates sixteen FBM211 field circuits
- Uses FBM auxiliary +24 VDC loop power
- Requires the separately ordered Type 4 termination cable
Foxboro RH916BT provides the field-terminal interface between an FBM211 input module and sixteen transmitter or supervised-contact circuits.
RH916BT routes the FBM auxiliary +24 VDC supply to field loops and provides individual loop current limiting.
The assembly is passive field-wiring hardware; signal conversion and channel configuration remain in the FBM211, while the Type 4 termination cable is ordered and verified separately.
Availability, condition, price, and shipping time for RH916BT are confirmed during quotation.
Foxboro RH916BT Manuals, Datasheets, Links
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
- Use the FBM auxiliary +24 VDC source only as documented
- Include every connected transmitter in the power budget
- Investigate current limiting before replacing a field transmitter
- Prepare conductors for the compression terminal style
- Preserve channel, return and shield assignments
- Torque and strain-relieve wiring according to site practice
- Inspect the Type 4 cable connector and latch
- Measure loop voltage at the TA under real load
- Verify representative channels in both isolation groups
- Auxiliary-powered 4–20 mA transmitter termination
- Compact DIN-rail FBM211 field wiring
- Supervised contact circuits using FBM-provided loop power