Features:
- 25 MHz MC68040 processor with FPU
- 4MB parity-protected DRAM
- Four IndustryPack interfaces
MVME162-020A uses the 25 MHz MC68040 with FPU, 4MB parity-protected DRAM, four IndustryPack interfaces, and two serial ports.
Its VMEbus connection supports embedded control and modular I/O expansion, while this ordering configuration omits both Ethernet and SCSI.
Verify A16/A24/A32 VMEbus compatibility, IndustryPack requirements, serial settings, jumpers, chassis power, and forced-air cooling before replacement.
The Motorola VME MVME162-020A VME Embedded Controller may still be available for purchase and support from Apter Power beyond End-Of-Life (EOL) by the manufacturer (OEM).
Motorola VME MVME162-020A VME Embedded Controller Manuals, Datasheets, Links
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
Motorola VME MVME162-020A VME Embedded Controller Specs
General
- ManufacturerMotorola VME
- ModelMVME162-020A
- ConditionNew Original ready stock
- Product FamilyMVME162 Series
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
Onboard memory resources
- DRAM: 4MB parity-protected DRAM.
- SRAM: Battery-backed static RAM.
- Firmware storage: Flash memory for monitor/debugger firmware.
- NVRAM: Battery-backed NVRAM and time-of-day clock.
VME and modular I/O connections
- Network and storage: No Ethernet or SCSI interface.
- VMEbus: A16/A24/A32 addressing.
- Serial I/O: Two serial ports.
- Expansion: Four IndustryPack interfaces.
Chassis and installation checks
- Compatibility: Verify VME chassis and backplane compatibility before insertion.
- Configuration: Confirm jumper and system-controller settings against the Motorola manual.
- Cooling: Maintain an operating range of 0°C to +70°C with forced-air cooling.
- Handling: Use antistatic precautions and remove chassis power before installation.