Features:
- 25 MHz MC68040 processor
- 32MB SDRAM
- SCSI and Ethernet configuration
Motorola identifies MVME162PA-252SE as the SCSI and Ethernet configuration of the MVME162PA2 VME Embedded Controller. The order code represents the fully configured 32MB MVME162PA2 assembly with both storage and network interfaces.
The controller combines 32MB SDRAM, battery-backed SRAM, Flash memory, serial I/O, and IndustryPack expansion. VMEchip2 supplies master/slave bus functions and DMA, while Petra supports memory, local I/O, and the two IndustryPack channels.
Verify chassis power, forced-air cooling, interface cabling, and IndustryPack compatibility before installation. Confirm the single- or double-wide IndustryPack arrangement and front-panel cabling before the controller is inserted into the VME chassis.
The Motorola VME MVME162PA-252SE MVME162PA2 VME Embedded Controller is listed as Active / Available from OEM. Contact Apter Power for quotation, official documentation, and configuration review.
Motorola VME MVME162PA-252SE MVME162PA2 VME Embedded Controller Manuals, Datasheets, Links
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
Motorola VME MVME162PA-252SE MVME162PA2 VME Embedded Controller Specs
General
- ManufacturerMotorola VME
- ModelMVME162PA-252SE
- ConditionNew Original ready stock
- Product FamilyMVME162PA2
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
Onboard memory resources
- Main memory: 32MB configurable SDRAM with ECC option
- Backup memory: 128KB SRAM with battery backup
- Firmware storage: 1MB Flash memory
- NVRAM / clock: 8K x 8 NVRAM with time-of-day clock
Communication and expansion resources
- Storage: SCSI interface with local-bus DMA
- Network: Ethernet interface with local-bus DMA
- Serial I/O: Four EIA-232-D DTE serial ports
- IndustryPack: Two IndustryPack interfaces with DMA
Chassis and commissioning checks
- Chassis: Use a compatible VME chassis
- Storage: Verify front-panel SCSI and Ethernet cabling
- IndustryPack: Confirm IndustryPack module compatibility
- Cooling: Provide forced-air cooling for the stated operating range