Features:
- MPC604 PowerPC processor paired with 32MB ECC DRAM
- Falcon memory control with single-bit correction and double-bit detection
- MVME761 I/O mode with 10/100 Ethernet and Fast SCSI support
The MVME2604-1131 is the documented 32MB ECC DRAM configuration within the MPC604-based MVME2604 group.
The board coordinates VMEbus transfers with PCI peripherals, including Ethernet, SCSI, and a PMC expansion position for application-specific I/O.
Selection should include verification of the MVME761 transition module, P2 connector style, serial interface modules, and cooling provisions.
The Motorola MVME2604-1131 VME Processor Module may still be available for quotation and support from Apter Power beyond manufacturer End-Of-Life (EOL).
Motorola MVME2604-1131 VME Processor Module Manuals, Datasheets, Links
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
Motorola MVME2604-1131 VME Processor Module Specs
General
- ManufacturerMotorola VME
- ModelMVME2604-1131
- ConditionNew Original ready stock
- Product FamilyMVME2600 Series
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
32MB ECC configuration
- DRAM capacity: The ordering code corresponds to a 32MB ECC DRAM memory configuration.
- Error handling: Falcon provides single-bit correction and double-bit error detection.
- Interleaving: Two-way interleaving supports the processor memory path.
- Firmware storage: Flash resources hold the boot monitor and system firmware.
Peripheral connection paths
- Ethernet: The DEC 21140 controller supports Ethernet through the selected transition module.
- SCSI: Fast SCSI resources are routed through the P2 connection.
- Serial I/O: Two asynchronous and two synchronous/asynchronous channels are supported by the architecture.
- Local controls: Front-panel reset, abort, and status indicators support service access.
Startup and service resources
- PPCBug: Motorola firmware provides board startup, debug, and diagnostic facilities.
- Watchdog: The watchdog timer can generate a reset after a programmed timeout.
- Status LEDs: Front-panel indicators report processor, PCI, system-controller, and fault conditions.
- Console setup: Confirm the selected serial interface and terminal parameters before troubleshooting.