Features:
- 1 GHz MPC7455 PowerPC processor with 256KB L2 and 2MB L3 cache
- 512MB PC133 ECC SDRAM expandable to 1GB with the documented memory mezzanine
- IEEE front-panel handles with VME64 and dual 33/66 MHz PMC resources
The MVME5500-0163 ordering code identifies the 1 GHz MPC7455 and 512MB SDRAM configuration fitted with IEEE front-panel handles.
Motorola balances processor and memory throughput with dual 64-bit PCI buses, two PMC sites, a Universe II VME interface, Gigabit Ethernet, 10/100BaseTX Ethernet, and serial resources.
Confirm the P2 jumper mode, PMC or IPMC hardware, transition-module routing, voltage keying, firmware environment, and forced-air cooling before installing the board.
Official documentation, configuration review, and quotation support for the Motorola MVME5500-0163 VME Single-Board Computer are available through Apter Power.
Motorola MVME5500-0163 VME Single-Board Computer Manuals, Datasheets, Links
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
Motorola MVME5500-0163 VME Single-Board Computer Specs
General
- ManufacturerMotorola
- ModelMVME5500-0163
- ConditionNew Original ready stock
- Product FamilyMVME5500 Series
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
Processing and bus structure
- Processor core: The MPC7455 operates at 1 GHz with separate 32KB instruction and data L1 caches, 256KB L2 cache, and 2MB L3 cache.
- Memory controller: The Marvell Discovery GT-64260A supports the 133 MHz host bus and two banks of 133 MHz ECC SDRAM.
- Local buses: Two 64-bit PCI buses separate the two PMC sites from the VME and PMCspan resources.
- VME bridge: The Universe II device implements the documented ANSI/VITA 1-1994 VME64 interface.
On-board communication resources
- Ethernet port 1: The front-panel RJ-45 supports 10/100/1000Base-T operation.
- Ethernet port 2: The second interface supports 10/100Base-T and can also route through the MVME761.
- Serial channels: Two 16550-compatible UARTs provide the documented asynchronous serial functions.
- PMC sites: Two IEEE P1386.1 positions accept supported 33 or 66 MHz PMC modules.
System matching checks
- Backplane: Confirm that the target VME chassis provides the required P1 and P2 connectivity.
- Handle style: Match the IEEE front-panel handle arrangement before replacing a neighboring configuration.
- Cooling: Maintain forced-air cooling so inlet air remains within the specified operating range.
- Firmware: Verify MOTLoad, BSP, and operating-system support before transferring an application.