Features:
- New IEEE-handle R-suffix code
- 512 MB onboard DDR ECC memory
- Tsi148 VME interface with 2eSST support
Official ordering information presents MVME61006E-0163R as the new code for the 512 MB IEEE-handle member of the MVME6100 6E group.
The board couples MPC7457 processing with the MV64360, dual Gigabit Ethernet, two serial channels, two PMC-X sites, banked flash, and NVRAM.
Use the complete MVME61006E-0163R code when confirming IEEE front hardware, VME slot signals, mezzanine selection, firmware, cabling, and forced-air cooling.
The Motorola MVME61006E-0163R VMEbus Single-Board Computer is recorded as Active / Available from OEM; quotation support is available from Apter Power.
Motorola MVME61006E-0163R VMEbus Single-Board Computer Manuals, Datasheets, Links
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
Motorola MVME61006E-0163R VMEbus Single-Board Computer Specs
General
- ManufacturerMotorola
- ModelMVME61006E-0163R
- ConditionNew and Original
- Product FamilyMVME6100 Series
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
Core board architecture
- Processor: The 1.267 GHz MPC7457 provides PowerPC execution and a 128-bit AltiVec unit.
- Memory controller: The MV64360 connects the processor to 512 MB DDR266 ECC SDRAM and local PCI resources.
- Nonvolatile resources: The design includes 128 MB flash divided into two banks and 32 KB NVRAM.
- VME bridge: The Tsi148 provides VME64 connectivity and documented high-speed 2eSST operation.
Network and service connections
- Ethernet: Two 10/100/1000BaseT ports provide Gigabit network interfaces.
- Serial console: Two asynchronous 16550-compatible ports support service communication.
- PMC-X I/O: Two mezzanine sites add supported front-panel or rear-I/O functions.
- Backplane path: P1 and P2 connections and the Tsi148 bridge integrate the board with the VME chassis.
System integration checklist
- Order identity: Retain the R suffix and IEEE-handle specification when matching MVME61006E-0163R.
- Mechanical fit: Check the 6U slot, handle clearance, connector engagement, PMC card width, and rear I/O.
- Electrical conditions: Verify PMC signaling voltage, power budget, backplane compatibility, and system-controller role.
- Commissioning: Confirm forced-air cooling, firmware, boot settings, console access, drivers, and application operation.