Features:
- 32 MHz MC68040 processor with 8 MB shared DRAM
- Four IndustryPack positions for application I/O
- VME64 interface without onboard Ethernet or SCSI
Motorola MVME162-520 is the 8 MB configuration with 512 KB battery-backed SRAM and 1 MB Flash.
MVME162-520 uses IndustryPack modules and two serial ports to adapt the controller to system-specific communication and control tasks.
Check module power, serial wiring, backplane compatibility, jumper settings, forced-air cooling, and software drivers before commissioning MVME162-520.
The Motorola MVME162-520 Embedded Controller may be sourced with official documentation and system-matching support from Apter Power.
Motorola MVME162-520 Embedded Controller Manuals, Datasheets, Links
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
Motorola MVME162-520 Embedded Controller Specs
General
- ManufacturerMotorola VME
- ModelMVME162-520
- ConditionNew Original ready stock
- Product FamilyMVME162 Family
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
Onboard processing and memory resources
- Processor: 32 MHz MC68040 processor.
- Interface: 8 MB shared dynamic RAM.
- Backup memory: 512 KB battery-backed SRAM.
- Firmware storage: 1 MB Flash memory.
Modular expansion and peripheral resources
- IndustryPack: Four IndustryPack positions.
- Serial communication: Two serial communication ports.
- Ethernet: No onboard Ethernet.
- SCSI: No onboard SCSI.
Backplane transfer and controller functions
- VMEbus: ANSI/VITA 1-1994 VME64 interface.
- Interface: D08 through D64 transfer support.
- Installation check: Interrupt and system-controller resources.
- VMEbus 2: Local and VMEbus DMA functions.