Features:
- IPv4 and IPv6 Layer 3 routing is integrated into the switch firmware.
- Static routes, OSPF, RIP, and VRRP operate beside the Layer 2 switching functions.
- Copper, SFP, and extender connections share one modular XM-400 chassis.
Siemens 6GK5416-4GR00-2AM2 combines subnet routing with VLAN-controlled traffic separation in the same managed switch.
Twelve dedicated RJ45 ports and four selectable combo positions form the sixteen-port base connection plane.
Redundant supply inputs, removable configuration storage, and multiple management channels support installation and device administration.
The Siemens 6GK5416-4GR00-2AM2 SCALANCE XM416-4C Layer 3 Managed Modular Industrial Ethernet Switch may still be available for purchase and support from Apter Power beyond End-Of-Life (EOL) by the manufacturer (OEM).
Siemens 6GK5416-4GR00-2AM2 SCALANCE XM416-4C Layer 3 Managed Modular Industrial Ethernet Switch Manuals,Datasheets,Link
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
How traffic crosses configured subnets
- Static paths: IPv4 and IPv6 destinations can be assigned fixed routes.
- Dynamic exchange: RIPv2, RIPng, OSPFv2, and OSPFv3 distribute supported route information.
- Gateway continuity: VRRP operates for both IPv4 and IPv6 gateway redundancy.
- Integrated license: Layer 3 processing is present in this order-number variant without a routing KEY-PLUG.
Segmentation before routed forwarding
- Port membership: Traffic can be separated according to the ingress switch port.
- Protocol grouping: Protocol-based VLAN rules divide frames by their protocol classification.
- IP grouping: IP-based VLAN assignment adds an address-oriented segmentation method.
- Dynamic registration: Dynamic VLAN handling works with up to 255 configured VLANs.
Copper and optical choices in one chassis
- Fixed access: Twelve Gigabit RJ45 connectors remain dedicated copper ports.
- Shared media: Four combo positions choose between RJ45 and the paired SFP interface.
- Optical modules: The SFP paths accept supported 100 or 1000 Mbit/s transceivers.
- Modular growth: Two media-extender interfaces increase the usable layout to twenty-four ports.
Signals used to inspect and correlate events
- Port evidence: Link diagnostics, packet-type statistics, and error counters isolate affected interfaces.
- Event record: SysLog collects supported switch events for later review.
- Traffic observation: Single- and multiport mirroring copy selected frames to an analysis connection.
- Clock sources: NTP, SNTP, and SICLOCK support align device time with the selected network source.