Open now · we reply within 2 working hours

Talk to our team

+86 15359408275

Call and you reach an account manager, not a queue.


What happens next?

  1. Email confirmationYou will get an email confirming that we have received your enquiry.
  2. Dedicated Account ManagerOne of our team will be in touch to confirm your part(s) specification and condition.
  3. Your quoteYou will receive a comprehensive quote tailored to your specific needs.

Supplied with every order

  • Commercial invoice and packing list
  • Nameplate and packaging photographs
  • 12-month Apter Power warranty
Need a specific document format for your import process? Say so in the enquiry and we will confirm before you order.

Recommended to use with 6EP1961-2BA21

All in stock · Add one and it is quoted together with the model, one shipping cost.

6EP1961-2BA21

Siemens 6EP1961-2BA21 is a four-channel SITOP PSE200U selectivity module that divides a 24 V DC, 40 A source into individually monitored and adjustable 10 A load circuits.

In Stock Ships by Tuesday, November 24 Fast Shipping Available
Dispatched within 24 hours of a confirmed order.
Nameplate and packaging photographs supplied before dispatch.
ISO 9001:2015 certified

Industry compliance and certified quality in every part we supply.

View certificate

Get a price for 6EP1961-2BA21

6EP1961-2BA21Siemens 4-Channel 24 V DC 10 A Selectivity Module
Edit or add anything — monitor type, cable length, other part numbers.

Tell us which and we will shape the quote around it.

Attach a nameplate photo and an engineer will confirm the exact part number before quoting.

Answered within 2 working hours, Mon–Fri 09:00–18:00 GMT+8. Used only for this quotation.

Your Quote Request Has Been Received

Thank you. Our sales team will review your request and contact you shortly.

Ordering, delivery and after-sales

Your account managerNamed, start to finish

Your enquiry is picked up by a named account manager who checks the configuration before pricing and stays with the order through dispatch and after-sales. You are not passed round a shared inbox.

  • Direct email and WhatsApp for that person
  • Quotation signed by whoever prepared it
  • Same contact if anything needs sorting later

Enquiries are answered within 2 working hours, Mon–Fri 09:00–18:00 GMT+8.

Warranty12 months from shipment

Twelve months from date of shipment against functional defects under normal operating conditions. Because Apter Power is an independent supplier, the manufacturer’s own warranty does not apply — ours stands in its place, which on a discontinued part is the only cover there is.

If it arrives faulty or does not fitReturn authorisation same day

A written procedure, not a negotiation.

  • Report the fault within the 12-month warranty period
  • We issue a return authorisation the same working day
  • Return the unit within 14 days of reporting, in antistatic packaging where applicable
  • Replacement, repair or refund at our option, confirmed in writing
  • Return shipping on a confirmed warranty defect is at our cost

If it turns out to be a configuration mismatch rather than a fault, we help you identify the correct part instead of leaving you with the wrong one.

Pre-dispatch inspectionWhat we check — and what we don’t

Checked:

  • Part number and revision read from the unit nameplate, and photographed
  • Outer packaging and seals inspected and photographed
  • Connector threads and mounting stud checked for damage
  • Quantity and accessory contents verified against the packing list

Not checked: no powered functional or calibration test is performed on this item; sensitivity and frequency response are not re-certified by Apter Power; no hazardous-area certification is issued by us. If you need a functional test report before shipment, ask when you request the quote and we will confirm whether it is possible and what it adds to the lead time.

Our quality management is certified to ISO 9001:2015. More usefully, the scope above is published rather than summarised as “tested and approved” — nothing is implied that we did not do.

Shipping, customs and documentsDispatch in 24h · 170+ countries

Dispatch within 24 hours of a confirmed order for items held in stock. DHL, FedEx and UPS express to 170+ countries, typically 3–6 working days door to door; tracking is emailed the day the order leaves us. Shipping method and cost are itemised on every quotation and never added afterwards.

Most delays on an international spare are paperwork rather than freight, so the documents are prepared before the parcel leaves:

  • Commercial invoice and packing list on every shipment
  • Certificate of Origin prepared on request — ask at enquiry stage
  • HS code stated on the quotation, not discovered at clearance
  • We work to your broker’s format if you tell us what it is
PaymentTelegraphic transfer only

We accept payment by telegraphic transfer (T/T) only. Bank details appear on the pro-forma invoice and nowhere else — we never send revised bank details by email after quoting. If you receive a message claiming our account has changed, call +86 15359408275 before paying.

How to orderSend the part number

Send the enquiry above, or email the part number, quantity and destination country. In-stock items show a live quantity; where a part is not held we show "Ask" and confirm availability from our supplier network before quoting, so you are never quoted a lead time we cannot meet.

Discover the experience, people and global sourcing expertise behind Apter Power. About us »

Technical specifications

 set by the part-number suffix dotted  awaiting confirmation against the OEM datasheet

Part identification

Manufacturer
Siemens
Part Number
6EP1961-2BA21
Product Family
Siemens SITOP
Product Type
4-Channel 24 V DC 10 A Selectivity Module
Stock
1
Weight
0.441 lbs (0.2 kg)
Estimated shipping dimensions
8.2x8.8x7.7cm
Tariff Code
8536300000
Country of origin
Austria
Place of shipment
Xiamen,Fujian,China

More information

Features:

  • Separates one 24 V DC supply into four independently monitored load circuits.
  • Adjusts every channel from 3 to 10 A and indicates its state with a three-color LED.
  • Supports simultaneous or sequenced startup plus one common signaling contact.
Siemens 6EP1961-2BA21 protects the distribution side of a DC control supply rather than generating the 24 V source itself.

The trip setting, overload magnitude, and startup sequence work together to prevent one load branch from collapsing the shared supply.

Local LEDs identify the individual output condition, while the common contact transfers one combined status to the control system.

The Siemens 6EP1961-2BA21 4-Channel 24 V DC 10 A Selectivity Module is listed as Active / Available from OEM; Apter Power can assist with exact-model documentation and matching.
Siemens 6EP1961-2BA21 4-Channel 24 V DC 10 A Selectivity Module Manuals,Datasheets,Link Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.

Threshold and trip relationships

  • Adjustment: Each output is set independently from 3 to 10 A.
  • Slow overload: A moderate overload is disconnected after approximately five seconds.
  • Current limit: A 1.5-times condition produces an approximately 100 ms response.
  • Fast boundary: Overcurrent with input below 20 V triggers an approximately 0.5 ms action.

Coordinated energization of four loads

  • Simultaneous mode: All outputs can switch on together.
  • Short delay: A 25 ms channel sequence is available.
  • Longer delay: A 100 ms channel sequence is available.
  • Load optimization: The DIP switch can select load-optimized startup timing.

Local and remote state paths

  • Green indication: The related output is conducting.
  • Yellow indication: The related output is manually switched off.
  • Red indication: Overcurrent has disconnected the related output.
  • Common contact: One changeover contact reports the aggregate module condition.

Source, reset, and mounting connections

  • Input: Two positive and two zero-volt screw terminals accept the DC source.
  • Outputs: Four separate screw terminals feed the protected load circuits.
  • Reset: Each channel has a 24 V non-isolated remote-reset input.
  • Mounting: The enclosure snaps onto a 35 mm DIN rail.

Description

Siemens 6EP1961-2BA21 is a four-channel SITOP PSE200U selectivity module for 24 V DC control circuits. It receives as much as 40 A from the upstream supply and distributes that source through four monitored outputs rated up to 10 A each.

Each output of 6EP1961-2BA21 has a potentiometer that sets the current-dependent trip threshold from 3 to 10 A. An overload between one and 1.5 times the setting is separated after about five seconds, while a higher current limit produces a faster response.

Startup behavior in 6EP1961-2BA21 can switch all channels together or sequence them with 25 ms, 100 ms, or load-optimized timing. Three-color indication shows a conducting output, a manually disabled channel, or a channel disconnected by overcurrent, and a common changeover contact exports the aggregate state.

The four load circuits of 6EP1961-2BA21 share the controlled 22-30 V DC input and are not galvanically isolated from it when switched off. Per-channel remote reset accepts a non-isolated 24 V signal, while screw terminals and a 35 mm DIN-rail latch define the cabinet connection and mounting boundaries.

Case studies

Order from our published case studies. Each one names the customer situation, the parts involved and what changed.

Jim
Xiamen, ChinaBently Nevada

A Practical Bently Nevada 3500 Plan to Cut Factory Downtime

A practical factory deployment plan connecting 3300 XL proximity probes, a Bently Nevada 3500 rack, DCS/PLC systems and System 1 software to detect rotating-equipment risks earlier and support predictive maintenance.

3 LayersSensors to diagnostics
4 StepsPlanning to maintenance
“ A 3500 project starts with understanding machinery risks and maintenance needs. — Jim ”
Jim · Xiamen, China · 2026
Read the full case study
Miya
ChinaQuality Inspection & Traceability

ISO 9001:2015 Quality Management Certification

Review the ISO 9001:2015 certificate for Apter Power, its certified scope, certificate number, validity, process-control purpose and the limits of management-system certification.

ISO 9001Certified quality system
TraceableDocumented order records
“ Certification matters only when the process is visible in everyday work—from the first requirement review to the final release. — Miya ”
Miya · China · August 2026
Read the full case study
Leonia
Xiamen, ChinaAutomation spares

Bureau Veritas Audit Strengthens Trust for Global Buyers

A Bureau Veritas review checked Apter Power's business licence, registered address, office and selected export records, helping overseas buyers verify the company behind a quotation before ordering.

VerifiedBusiness identity checked
BV AuditCompany records reviewed
“ Trust starts with company details and trading records that buyers can verify. — Apter Power Team ”
Leonia · Xiamen, China · 2026
Read the full case study

Where this item is used

The nine industries we publish solutions for. Each links through to that industry page.

FAQs

Questions we actually get about this item. If yours is not here, put it in the message field above.

About this part

How are the four outputs set on Siemens 6EP1961-2BA21?

Each channel on Siemens 6EP1961-2BA21 uses its own potentiometer to set a current threshold between 3 and 10 A.

Which startup sequences can Siemens 6EP1961-2BA21 apply?

Siemens 6EP1961-2BA21 can energize all outputs together or use 25 ms, 100 ms, or load-optimized sequential switching after the source rises above 20 V.

What does the three-color indicator show on Siemens 6EP1961-2BA21?

On Siemens 6EP1961-2BA21, green identifies a conducting output, yellow a manually disabled output, and red a channel disconnected by overcurrent.

How does Siemens 6EP1961-2BA21 respond to sustained overload?

For an overload between one and 1.5 times the selected threshold, Siemens 6EP1961-2BA21 disconnects the affected circuit after approximately five seconds.

Can one output of Siemens 6EP1961-2BA21 be reset remotely?

Yes. Siemens 6EP1961-2BA21 provides a non-isolated 24 V reset input for each output so one channel can be re-enabled without resetting all four.

What state is exported by Siemens 6EP1961-2BA21 to a controller?

A common 0.1 A changeover contact on Siemens 6EP1961-2BA21 transfers the combined channel condition to an external monitoring input.

Can't find the part number you need?

We quote thousands of parts that never appear on this site — current, obsolete and hard to find. Send the number and we will tell you honestly whether we can get it.

Mon–Fri 09:00–18:00 GMT+8 · enquiries answered within 2 working hours

Talk to our team

An account manager works the enquiry through with you — checking the configuration before pricing, rather than sending a price list back.

Mon–Fri 09:00–18:00 GMT+8 · Xiamen, China

ISO 9001:2015 certified

Every part we supply meets industry standards and comes from a certified quality management system.

View certificate

You may also like

6EP3134-0TA00-0AY0
Siemens 6EP3134-0TA00-0AY0 is a SITOP PSU3400 stabilized power supply that converts a 14–32 VDC source to an adjustable 24 VDC, 10 A output.
In stock
6EP1961-3BA21
Siemens 6EP1961-3BA21 is a SITOP PSE202U redundancy module that decouples two 24 V DC supplies and carries up to 40 A total.
In stock
6EP1337-3BA00
The Siemens 6EP1337-3BA00 is a SITOP PSU100M stabilized power supply module that converts 120/230 V AC input into an adjustable 24 to 28.8 V DC output for high-current industrial control equipment.
In stock
6EP1436-3BA00
The SIEMENS 6EP1436-3BA00 is a 3-phase stabilized power supply from the premier SITOP modular product line, designed to meet the rigorous demands of complex industrial environments.
In stock
6EP3331-6SB00-0AY0
Siemens 6EP3331-6SB00-0AY0 is a stabilized LOGO!POWER supply with 100-240 V AC input and 24 V DC, 1.3 A output.
In stock
6EP1322-1SH03
Siemens 6EP1322-1SH03 is a LOGO!Power stabilized supply that accepts wide-range AC or DC input and delivers an adjustable 12 V DC output rated at 4.5 A.
In stock
6EP1961-2BA21
Siemens 6EP1961-2BA21 is a four-channel SITOP PSE200U selectivity module that divides a 24 V DC, 40 A source into individually monitored and adjustable 10 A load circuits.
In stock
6EP3310-6SB00-0AY0
Siemens 6EP3310-6SB00-0AY0 is a LOGO!Power stabilized supply with 100–240 V AC or 110–300 V DC input and 5 V DC/3 A output.
In stock
6EP1332-5BA10
Siemens 6EP1332-5BA10 is a SITOP PSU100C power supply that converts single-phase AC or DC input into an adjustable, regulated 24 V DC output for automation loads up to 4 A.
In stock
6EP1336-2BA10
Built for high-current 24 V DC cabinet loads, Siemens 6EP1336-2BA10 provides 20 A output and a signaling contact for monitored power distribution.
In stock

Looking for a part-number suffix that is not listed? We quote thousands of Bently Nevada configurations that never appear on the site — send the part number.

Same kind of part from other manufacturers:

Product browsing history

Request a quote WhatsApp Chat