Open now · we reply within 2 working hours

Talk to our team

+86 15359408275

Call and you reach an account manager, not a queue.


What happens next?

  1. Email confirmationYou will get an email confirming that we have received your enquiry.
  2. Dedicated Account ManagerOne of our team will be in touch to confirm your part(s) specification and condition.
  3. Your quoteYou will receive a comprehensive quote tailored to your specific needs.

Supplied with every order

  • Commercial invoice and packing list
  • Nameplate and packaging photographs
  • 12-month Apter Power warranty
Need a specific document format for your import process? Say so in the enquiry and we will confirm before you order.

Recommended to use with 6EP1961-3BA21

  • 6EP1336-3BA00 Stabilized Power Supply
  • 6EP1437-2BA20 Stabilized Power Supply
  • 6EP1436-3BA00 3-phase stabilized power supply

All in stock · Add one and it is quoted together with the model, one shipping cost.

6EP1961-3BA21

Siemens 6EP1961-3BA21 is a SITOP PSE202U redundancy module that decouples two 24 V DC supplies and carries up to 40 A total.

In Stock Ships by Tuesday, November 24 Fast Shipping Available
Dispatched within 24 hours of a confirmed order.
Nameplate and packaging photographs supplied before dispatch.
ISO 9001:2015 certified

Industry compliance and certified quality in every part we supply.

View certificate

Get a price for 6EP1961-3BA21

6EP1961-3BA21Siemens SITOP PSE202U Redundancy Module
Edit or add anything — monitor type, cable length, other part numbers.

Tell us which and we will shape the quote around it.

Attach a nameplate photo and an engineer will confirm the exact part number before quoting.

Answered within 2 working hours, Mon–Fri 09:00–18:00 GMT+8. Used only for this quotation.

Your Quote Request Has Been Received

Thank you. Our sales team will review your request and contact you shortly.

Ordering, delivery and after-sales

Your account managerNamed, start to finish

Your enquiry is picked up by a named account manager who checks the configuration before pricing and stays with the order through dispatch and after-sales. You are not passed round a shared inbox.

  • Direct email and WhatsApp for that person
  • Quotation signed by whoever prepared it
  • Same contact if anything needs sorting later

Enquiries are answered within 2 working hours, Mon–Fri 09:00–18:00 GMT+8.

Warranty12 months from shipment

Twelve months from date of shipment against functional defects under normal operating conditions. Because Apter Power is an independent supplier, the manufacturer’s own warranty does not apply — ours stands in its place, which on a discontinued part is the only cover there is.

If it arrives faulty or does not fitReturn authorisation same day

A written procedure, not a negotiation.

  • Report the fault within the 12-month warranty period
  • We issue a return authorisation the same working day
  • Return the unit within 14 days of reporting, in antistatic packaging where applicable
  • Replacement, repair or refund at our option, confirmed in writing
  • Return shipping on a confirmed warranty defect is at our cost

If it turns out to be a configuration mismatch rather than a fault, we help you identify the correct part instead of leaving you with the wrong one.

Pre-dispatch inspectionWhat we check — and what we don’t

Checked:

  • Part number and revision read from the unit nameplate, and photographed
  • Outer packaging and seals inspected and photographed
  • Connector threads and mounting stud checked for damage
  • Quantity and accessory contents verified against the packing list

Not checked: no powered functional or calibration test is performed on this item; sensitivity and frequency response are not re-certified by Apter Power; no hazardous-area certification is issued by us. If you need a functional test report before shipment, ask when you request the quote and we will confirm whether it is possible and what it adds to the lead time.

Our quality management is certified to ISO 9001:2015. More usefully, the scope above is published rather than summarised as “tested and approved” — nothing is implied that we did not do.

Shipping, customs and documentsDispatch in 24h · 170+ countries

Dispatch within 24 hours of a confirmed order for items held in stock. DHL, FedEx and UPS express to 170+ countries, typically 3–6 working days door to door; tracking is emailed the day the order leaves us. Shipping method and cost are itemised on every quotation and never added afterwards.

Most delays on an international spare are paperwork rather than freight, so the documents are prepared before the parcel leaves:

  • Commercial invoice and packing list on every shipment
  • Certificate of Origin prepared on request — ask at enquiry stage
  • HS code stated on the quotation, not discovered at clearance
  • We work to your broker’s format if you tell us what it is
PaymentTelegraphic transfer only

We accept payment by telegraphic transfer (T/T) only. Bank details appear on the pro-forma invoice and nowhere else — we never send revised bank details by email after quoting. If you receive a message claiming our account has changed, call +86 15359408275 before paying.

How to orderSend the part number

Send the enquiry above, or email the part number, quantity and destination country. In-stock items show a live quantity; where a part is not held we show "Ask" and confirm availability from our supplier network before quoting, so you are never quoted a lead time we cannot meet.

Discover the experience, people and global sourcing expertise behind Apter Power. About us »

Technical specifications

 set by the part-number suffix dotted  awaiting confirmation against the OEM datasheet

Part identification

Manufacturer
Siemens
Part Number
6EP1961-3BA21
Product Family
Siemens SITOP
Product Type
SITOP PSE202U Redundancy Module
Stock
1
Weight
0.4 kg
Estimated shipping dimensions
13.5 x 13.5 x 8 cm
Tariff Code
8537101190
Country of origin
Romania
Place of shipment
Xiamen,Fujian,China

More information

Features:

  • Dual-source decoupling: separates two SITOP power-supply outputs
  • Aggregate capacity: carries up to 40 A from two sources limited to 20 A each
  • Input monitoring: adjustable 20-25 V threshold with LEDs and relay signaling
6EP1961-3BA21 creates an OR-connected 24 V DC supply path so a failing source does not backfeed its partner.

Its monitoring contact reports whether both inputs remain above the selected voltage threshold.

The module is a redundancy element and therefore must not be specified as an electronic selectivity or multi-branch protection device.
Apter Power can review 6EP1961-3BA21 source-current limits, threshold setting, condition, and quotation scope.
Siemens 6EP1961-3BA21 SITOP PSE202U Redundancy Module Manuals,Datasheets,Link
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
  • Source count: two SITOP power supplies feed the module.
  • Per-source ceiling: each supply is limited to 20 A maximum.
  • Aggregate output: the shared path is rated for 40 A.
  • Electrical role: internal decoupling prevents reverse current between sources.
  • Adjustment: the front potentiometer spans 20 to 25 V.
  • Green state: both inputs are above the threshold.
  • Red state: at least one input is below the threshold.
  • Remote status: an isolated changeover relay contact reports the same condition.
  • Nominal level: the output is specified at 24 V DC.
  • Voltage drop: output follows the input minus approximately 0.5 V.
  • Adjustment: the output voltage is not adjustable.
  • Thermal limit: Siemens specifies current derating above 60 °C.
  • Redundant 24 V DC cabinet supply: combine two supported SITOP sources through a decoupled output.
  • Power-source monitoring: signal loss of either input to a PLC or alarm circuit.
  • Continuous control-load feeding: retain the shared load when one correctly sized source remains available.

Description

Placed between two 24 V DC power supplies and a common load, 6EP1961-3BA21 isolates the supply outputs so one source cannot feed back into the other. Each source may deliver up to 20 A, while the combined output path is rated for 40 A, supporting a redundant cabinet-power arrangement rather than branch selectivity.

Operational state on 6EP1961-3BA21 is visible through green and red LEDs and an isolated changeover relay contact. The front potentiometer sets the monitoring threshold from 20 V to 25 V, allowing the control system to signal when either input falls below the accepted level.

The passive output of 6EP1961-3BA21 follows the input minus approximately 0.5 V and is not adjustable. This behavior lets engineers account for voltage drop at the downstream load instead of expecting the module to regulate or balance the two supplies.

Case studies

Order from our published case studies. Each one names the customer situation, the parts involved and what changed.

May
UAEGE IS200VVIBH1C

Evidence Before Delivery

A Dubai power-project customer visited Apter Power in Xiamen to inspect GE turbine-control cards, labels, packaging and visible condition before delivery.

On siteCustomer inspection in Xiamen
Pre-deliveryIdentity & condition reviewed
“ Seeing the products, labels and inspection process in person gave us a clearer understanding of Apter Power's quality control. — Muhammad ”
May · UAE · October 2026
Read the full case study
May
Malaysia3500/22M

Malaysia Customer Collects Bently Nevada 3500/22-01-02-00 After On-Site Inspection

After equipment downtime, a Malaysian customer travelled to Xiamen to inspect and collect a Bently Nevada 3500/22-01-02-00. The unit could be tested and put into use the next day, helping shorten factory downtime and reduce associated losses.

5On-site checks
1 dayReady for testing
“ Apter responded quickly and had the right Bently Nevada module ready for us to inspect and collect. — Shah ”
May · Malaysia · October 2026
Read the full case study
Leonia
IndonesiaBently Nevada 3500/22M 288055-01

On-Site Verification for an Indonesian Power Plant

After a previous suspected-counterfeit purchase, an Indonesian power-plant customer used a 50/50 payment plan, visited Apter Power to inspect two Bently Nevada 3500/22M 288055-01 modules, requested COO documentation and approved next-day hotel delivery.

100%Modules inspected on site
50/50Deposit / balance after inspection
“ They are very professional and supply quality products. I have purchased Bently Nevada products from them and had a very good experience. — Tri ”
Leonia · Indonesia · May 2026
Read the full case study

Where this item is used

The nine industries we publish solutions for. Each links through to that industry page.

FAQs

Questions we actually get about this item. If yours is not here, put it in the message field above.

About this part

Can 6EP1961-3BA21 protect four independent load branches like a selectivity module?

No. It is a redundancy module with two source inputs and one common output path. Use separate branch protection when the cabinet requires selective feeder isolation.

What size supplies can feed 6EP1961-3BA21?

Siemens specifies two SITOP sources with a maximum output current of 20 A each. The module carries 40 A aggregate, so neither individual source should exceed its stated limit.

Why is the downstream voltage lower when using 6EP1961-3BA21?

The published output relationship is input voltage minus approximately 0.5 V. Include that drop and the cable loss when deciding whether the load will remain above its minimum operating voltage.

How does 6EP1961-3BA21 report a weak power-supply input?

A red LED appears when either input falls below the adjustable 20-25 V threshold, and the isolated relay contact changes state for remote monitoring.

Does 6EP1961-3BA21 actively balance current between two supplies?

No active load-balancing function is stated. It decouples the sources; current sharing depends on the power supplies and their output-voltage behavior.

When should the threshold on 6EP1961-3BA21 be set before commissioning?

Set it during cabinet commissioning to the lowest acceptable input condition for the downstream load. Use an insulated screwdriver and test both input-loss cases before releasing the redundancy alarm.

Can't find the part number you need?

We quote thousands of parts that never appear on this site — current, obsolete and hard to find. Send the number and we will tell you honestly whether we can get it.

Mon–Fri 09:00–18:00 GMT+8 · enquiries answered within 2 working hours

Talk to our team

An account manager works the enquiry through with you — checking the configuration before pricing, rather than sending a price list back.

Mon–Fri 09:00–18:00 GMT+8 · Xiamen, China

ISO 9001:2015 certified

Every part we supply meets industry standards and comes from a certified quality management system.

View certificate

You may also like

6EP1336-3BA00
Siemens 6EP1336-3BA00 is a SITOP modular stabilized power supply with 120/230 VAC input and 24 VDC, 20 A output. It provides a regulated 480 W control supply for PLC, I/O and cabinet loads.
6EP1437-2BA20
Siemens 6EP1437-2BA20 is a SITOP PSU300S stabilized power supply for 400–500 VAC three-phase input and regulated 24 VDC, 40 A output. Its current reserve supports demanding industrial control loads.
6EP1436-3BA00
The SIEMENS 6EP1436-3BA00 is a 3-phase stabilized power supply from the premier SITOP modular product line, designed to meet the rigorous demands of complex industrial environments.
In stock
6EP3331-6SB00-0AY0
Siemens 6EP3331-6SB00-0AY0 is a stabilized LOGO!POWER supply with 100-240 V AC input and 24 V DC, 1.3 A output.
In stock
6EP1931-2FC21
Siemens 6EP1931-2FC21 is a SITOP DC UPS module that uses an external battery to maintain a 24 V DC load supply when the input supply fails.
In stock
6EP1334-2BA20
The Siemens 6EP1334-2BA20 is a SITOP PSU100S single-phase stabilized power supply with a 24 V DC, 10 A rated output.
In stock
6EP1333-1LB00
Siemens 6EP1333-1LB00 is a single-phase SITOP PSU100L power supply. It is designed for basic industrial control and automation power distribution with DIN-rail mounting.
In stock
6EP1332-2BA20
Siemens 6EP1332-2BA20 is a single-phase SITOP PSU100S stabilized power supply with 120/230 V AC input and adjustable 24 V DC, 2.5 A output.
In stock
6EP3333-3SA00-0AY0
Siemens 6EP3333-3SA00-0AY0 is a SITOP PSU2200 power supply that converts single-phase AC input into regulated 24 V DC at 5 A.
In stock
6EP3332-3SA00-0AY0
Siemens 6EP3332-3SA00-0AY0 is a SITOP PSU2200 stabilized power supply that converts single-phase AC input into regulated 24 V DC for industrial control loads.
In stock

Looking for a part-number suffix that is not listed? We quote thousands of Bently Nevada configurations that never appear on the site — send the part number.

Same kind of part from other manufacturers:

Product browsing history

Request a quote WhatsApp Chat