Features:
- A 15-inch touchscreen fronts the Celeron-based IPC377E built-in computer.
- One terabyte of hard-disk storage holds the selected operating system, application files, and retained data.
- Four serial, four USB, two Ethernet, and two graphics connections divide peripheral traffic by interface type.
The larger front of Siemens 6AV7230-0DA20-0BA0 combines local visualization with the computer that executes the installed industrial application.
Operating-system deployment and storage planning for 6AV7230-0DA20-0BA0 start from its blank software configuration and 1 TB HDD.
Panel position, enclosure cooling, and cable routing around 6AV7230-0DA20-0BA0 must preserve the fanless operating limits and rear connector access.
The Siemens 6AV7230-0DA20-0BA0 SIMATIC IPC377E 15-Inch Panel PC may still be available for purchase and support from Apter Power beyond End-Of-Life (EOL) by the manufacturer (OEM).
Siemens 6AV7230-0DA20-0BA0 SIMATIC IPC377E 15-Inch Panel PC Manuals,Datasheets,Link
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
Display and Panel Assembly
- Touch surface: The 15-inch front provides the local operator input and display area.
- Built-in format: Computer electronics and touchscreen occupy one panel-mount assembly.
- External display: DisplayPort and VGA can feed additional monitors independently of the integrated panel.
- Front seal: The IP65 front is the protected boundary exposed at the cabinet face.
Runtime and Expansion Storage
- Factory drive: The installed 1 TB hard disk stores the integrator-selected software image and data.
- System image: No operating system is preinstalled, so boot media and drivers must be prepared for this hardware.
- mSATA position: The full-size mSATA slot accepts the corresponding solid-state storage format.
- mPCIe position: The separate half-size mPCIe slot is reserved for a compatible expansion device rather than storage by default.
Serial, USB and Network Roles
- COM group: Four serial ports connect legacy or dedicated serial peripherals.
- USB 2.0 pair: Two USB 2.0 ports serve lower-bandwidth peripheral and service functions.
- USB 3.0 pair: Two high-current USB 3.0 ports serve faster or higher-current peripherals.
- Network pair: Two independent Gigabit-capable RJ45 interfaces provide separate Ethernet paths.
Fanless Supervision and Placement
- Fanless cooling: The enclosure removes heat without an internal fan.
- Temperature monitor: Internal temperature supervision reports the monitored thermal condition.
- Watchdog: The watchdog checks runtime execution separately from temperature monitoring.
- Ambient limit: Operation is specified from 0 to 40 C for the documented mounting conditions.