Features:
- This touch multi panel provides local operator visualization and input through a 10.4-inch TFT touchscreen.
- The display presents configured process graphics at 640 x 480 pixels with 65,536 colors.
- The panel combines RS422, RS485, Ethernet, USB, and MultiMediaCard connections for HMI integration.
The analog resistive touchscreen combines display and command entry at the machine interface, allowing the configured HMI project to present process information locally.
Its 6 MB configuration memory is used with the documented WinCC flexible 2005 Standard SP1 engineering environment, so the configured project release must be retained for replacement work.
Serial, Ethernet, USB and card connections should be matched to the installed unit before it is fitted into the existing cutout and operating arrangement.
The Siemens 6AV6643-0CD01-1AX1 SIMATIC MP 277 10-inch Touch Multi Panel may still be available for purchase and support from Apter Power beyond End-Of-Life (EOL) by the manufacturer (OEM).
Siemens 6AV6643-0CD01-1AX1 Manuals,Datasheets,Link
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
Operator Interaction
- Touch input: The analog resistive screen provides the panel operator input method.
- Display surface: The 10.4-inch TFT presents process graphics at 640 x 480 pixels.
- Color display: The panel supports 65,536 colors for the configured visualization.
- Backlight life: Backlight MTBF is documented as 50,000 hours at 25 °C.
Equipment Connections
- Serial paths: RS422 and RS485 interfaces connect the panel to the documented machine communication paths.
- Ethernet port: One RJ45 Ethernet interface provides the network connection.
- USB access: Two USB interfaces support the specified peripheral connections.
- Media slot: A MultiMediaCard slot is available for the panel memory medium.
Configuration Basis
- Engineering package: Use WinCC flexible 2005 Standard SP1 for the documented configuration environment.
- Configuration space: The panel provides 6 MB configuration memory for its HMI project.
- Project retention: Preserve the existing panel project and communication settings before replacement.
- Order-number match: Confirm the full AX1 suffix before loading a project intended for this panel.
Installation Conditions
- Front protection: Installed front-side protection is IP65 and NEMA 4X.
- Rear protection: The rear enclosure protection is IP20.
- Mounting position: The panel is specified for vertical installation.
- Inclination limit: A 35 degree inclination is permitted without external ventilation.