Features:
- Sixteen independent relays with changeover contacts.
- Rear screw-terminal access to common, normally open and normally closed contacts.
- Jumper-selectable relay-driver inversion for project fail-safe logic.
The current ordering configuration is VM600 RLC16 200-570-000-014, a sixteen-channel relay card for VM600 racks.
It routes configured alarm or status signals to external annunciation and shutdown circuits through isolated changeover contacts.
Confirm terminal mapping, contact loading, suppression and required de-energized state before commissioning.
Availability is subject to Apter Power inventory and sourcing confirmation.
Verified resources for Vibro-Meter VM600 RLC16 200-570-000-014:
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
- Interfaces VM600 alarm states with plant annunciation circuits.
- Provides changeover contacts for configured shutdown or permissive logic.
- Supports multi-channel status switching in machinery protection installations.
- Assigns RL1 through RL16 to the required system alarm or status functions.
- Exposes common, normally open and normally closed contacts for each relay.
- Uses project logic and jumper settings to establish the intended energized state.
- Requires connected loads to remain within the published voltage, current and breaking ratings.
- Needs appropriate suppression when switching inductive field devices.
- Must preserve the validated fail-safe action of every shutdown-related relay circuit.
- Installs within the controlled environmental limits of the VM600 rack.
- Uses rack cooling and connector seating to maintain reliable relay operation.
- Requires non-condensing conditions and clean terminal interfaces during service.