Features:
- Eight Individually Isolated 4–20 mA Output Channels
- Built-In Barrier Interface for Documented Hazardous-Area Connections
- Pressure Clamp Terminal Interface Using ATSS3□
The Yokogawa ASI533-S00 is an analog output module for FIO Field Control Units. Eight isolated channels provide 4–20 mA output, with a maximum output current of 23 mA and documented load limits for connected field circuits.
The built-in barrier architecture provides galvanic isolation between the field interface and the system. The module is specified for installation in Zone 2 or Division 2 and for connection to suitable field devices in lower hazardous-area zones under Yokogawa conditions.
Before ordering the Yokogawa ASI533-S00, confirm the complete suffix code, channel requirements, terminal block, and Field Control Unit configuration.
Yokogawa ASI533-S00 Manuals, Datasheets, Drivers, Link
Important Notice: Manuals, accessories, cables, calibration data, and software are not included unless specifically listed in the quotation or product description. Please confirm documentation and accessory requirements before ordering.
Yokogawa ASI533-S00 Analog Output Module with Built-In Barrier Specs
General
- Manufacturer Yokogawa
- Model ASI533-S00
- Condition New Original ready stock
- Product Family ASI533-S00, ASI533, FIO Built-In Barrier Modules
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
- Eight isolated analog output channels
- Output signal range: 4–20 mA
- Maximum output current: 23 mA
- Allowable load: 0–750 Ω at 20 mA and 0–600 Ω at 23 mA
- Galvanic isolation between field interface and system
- Individual channel isolation
- Output accuracy: ±48 µA
- Update period: 10 ms
- Specified for Zone 2 or Division 2 installation
- Pressure clamp terminal connection through ATSS3□
- Operating ambient temperature: -20 to 70 °C
- Approximate module dimensions: 32.8 × 107.5 × 130 mm