Features:
- Built-in 4 GB Flashdisk: ABB documents non-removable mass storage for user data and logging.
- 4 MB processor memory: The PM592 configuration provides 4096 kB program memory.
- AC500 communications: Ethernet, two serial interfaces, FBP, and display are included.
PM592-ETH is distinguished from PM590-ETH and PM591-ETH by its integrated 4 GB Flashdisk for user data storage and logging.
The processor combines that storage resource with the PM59x Ethernet, serial, FBP, and local display architecture.
Define file use, retention, backup and recovery, terminal base, firmware, network settings, and storage capacity before commissioning.
Availability is subject to Apter Power inventory and sourcing confirmation.
PM592-ETH 1SAP150200R0271 Manuals, Datasheets, and Links
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
PM592-ETH 1SAP150200R0271 AC500 Processor Module with Flashdisk Specifications
General
- ManufacturerABB
- ModelPM592-ETH 1SAP150200R0271
- ConditionNew and factory sealed
- Product FamilyABB AC500
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
Built-in storage planning
- Purpose: Define which user data or logs belong on the Flashdisk.
- Capacity: Set project limits for file count, size, and retention.
- Write strategy: Avoid uncontrolled logging and document file-rotation behavior.
- Access: Apply the approved file and network-access policy.
Backup and recovery checks
- Backup: Copy required files under the approved maintenance procedure.
- Restoration: Test how configuration and user files are recovered.
- Integrity: Verify file completion before power-down or replacement.
- Records: Retain firmware, project, directory, and retention settings.
Controller integration review
- Terminal base: Confirm the installed base and connector arrangement.
- Network: Preserve Ethernet and serial parameters.
- Memory card: Separate removable-card use from built-in Flashdisk use.
- Startup: Validate application, communications, files, and diagnostics.