Features:
- Controller identity: Bailey nameplate identifies NMFC03 as a Network 90 multifunction controller.
- Supply declaration: The module is marked for +5 VDC and ±15 VDC with 27.4 VA demand.
- ABB service record: ABB lists YNMFC03 as the repair-service identifier for the NMFC03 controller.
NMFC03 is an installed-system controller module whose actual control strategy depends on the retained Network 90 project configuration.
The physical label verifies the module family and supply rails but does not establish firmware, memory size or interchangeability with another MFC revision.
Service planning should therefore preserve the exact model and compare the removed module, rack position and site records before release.
Apter Power supports the ABB NMFC03 Bailey Network 90 Multifunction Controller through quotations, verified documents and spare matching.
ABB NMFC03 Bailey Network 90 Multifunction Controller Manuals,Datasheets,Link
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
- Application record: The model name does not identify the control program or site configuration loaded for the installed controller.
- Rack context: Retain the installed slot, surrounding-module and power-rail record when planning a replacement.
- Service routing: YNMFC03 is the ABB repair-service identifier; the installed product model remains NMFC03.
- Logic rail: +5 VDC appears on the module nameplate.
- Bipolar rails: The same label specifies +15 VDC and -15 VDC.
- Demand: Nameplate apparent-power demand is 27.4 VA.
- Verification boundary: These are module label values, not a rack power-budget calculation.
- Exact-code match: Retain NMFC03 rather than substituting another MFC number by appearance.
- Rack records: Confirm the installed slot and associated Network 90 hardware from site drawings.
- Application records: Preserve the controller configuration because the hardware label does not contain the control strategy.
- Unverified attributes: Do not assume memory, firmware or cross-revision compatibility without applicable documentation.
- Installed Network 90 systems: Exact-model spare support for cabinets already using NMFC03.
- Controller maintenance: Replace a confirmed NMFC03 while retaining the site application and rack records.
- Repair planning: Use the YNMFC03 service identifier when reviewing ABB repair documentation.
- Engineering limit: A new control design requires fuller system documentation than this legacy nameplate provides.