Features:
- 15 kW Bulletin 1394 axis-module power rating
- 35.0 A continuous and 50.0 A peak output-current ratings
- Motor-power, brake, thermal, and axis-status connections
This catalog number identifies a Bulletin 1394 axis module that converts the shared DC-bus supply into controlled three-phase motor power.
The module includes an Axis Enabled indicator, motor-power terminals, and dedicated motor brake and thermal connections. Motor and cable selections must follow official combination tables.
Before ordering Allen-Bradley 1394C-AM75, confirm the complete order code, documented configuration, and connection requirements for the installed system.
1394C-AM75 Datasheet Manuals, Datasheets, Drivers, Link
Documentation Note: This document is provided for technical reference. Please confirm the applicable product configuration and document revision before ordering.
- Use 1394C-AM75 only with Bulletin 1394 system modules and servo motors listed for this axis-module current class in Rockwell combination tables.
- Motor power, feedback, and brake cables must match the selected motor and the connector arrangement documented for the installed Bulletin 1394 hardware.
- Confirm the system-module power class, total bus capacitance, firmware-dependent motor support, and feedback type before adding or replacing this axis module.
- Motor power is connected at the documented U1, V1, and W1 terminals with protective-earth bonding completed according to the installation drawings.
- Dedicated TB1 and TB2 connections provide the motor brake and thermal interfaces required by compatible Bulletin 1394 motor installations.
- The front-panel Axis Enabled indicator and terminator support axis-module status and bus completion within the assembled multi-axis system.
- The external heatsink must pass through the cabinet arrangement with sealing, clearances, and airflow maintained as shown in official drawings.
- Confirm motor current, power and feedback cables, brake wiring, thermal signals, grounding, and axis position before applying DC-bus power.
- Maintain the official ambient-temperature, humidity, shock, vibration, clearance, and enclosure requirements throughout commissioning and continuous operation.
- The module supplies controlled three-phase power to one compatible servo motor within a Bulletin 1394 multi-axis motion-control system.
- Its 15 kW rating supports only motor combinations listed for this axis module and the applicable feedback and cable configuration.
- The brake, thermal, motor-power, and status interfaces support coordinated axis operation when connected and commissioned according to official system instructions.