- Modular power hardware accepts the appropriate Kinetix 6200 or Kinetix 6500 control module
- The IAM supplies the converter function and the first servo-axis power stage on the rail
- Additional compatible axis modules can share the Bulletin 2094 DC power rail within system limits
2094-BC01-M01-M is the integrated power section at the head of a modular Bulletin 2094 multi-axis system.
The selected control module establishes the communication and safety architecture, while the IAM converter supplies its own inverter and permitted additional rail-mounted axes.
Validate the control hardware, installed series, aggregate power demand, regeneration, motor and feedback pair, conductor and connector requirements, and enclosure thermal design.
Availability, condition, price, and shipping time for 2094-BC01-M01-M are confirmed during quotation.
Allen-Bradley 2094-BC01-M01-M Kinetix 6200/6500 Manuals, Datasheets, Links
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
- Supported feedback devices depend on the Kinetix 6200 or Kinetix 6500 control module installed on the IAM
- Motor-feedback connector kits must match the selected motor and cable construction
- Customer-supplied feedback wiring must follow the pinout, shielding, and connector guidance in the user manual
- Branch-circuit protection must be selected for the IAM line input and complete connected power-rail load
- Motor overload protection settings must match the connected motor data and validated axis configuration
- Grounding, bonding, and protective-device installation must follow the Bulletin 2094 installation instructions
- Drive firmware compatibility is determined by the installed Kinetix 6200 or Kinetix 6500 control module
- Controller project and drive firmware revisions must be checked before downloading an existing configuration
- Rockwell Automation compatibility resources should be reviewed before replacing a control module or restoring firmware
- Bulletin 2094 multi-axis systems that need one IAM converter and a 6.1 A rms first inverter position
- SERCOS-based servo systems configured with a compatible Kinetix 6200 control module
- EtherNet/IP motion systems configured with a compatible Kinetix 6500 control module