- Single-axis EtherNet/IP motion control is configured through a compatible Logix controller
- Flying-lead feedback cables can use the documented 2090-K2CK-D15M low-profile connector kit
- An external passive-shunt connection supports machine-specific regenerative-energy management
2097-V32PR4-LM places one servo axis on the Logix motion network and uses the Kinetix 350 drive profile for axis setup and diagnostics.
Commissioning requires the exact motor-feedback combination, power and feedback cables, IP-addressing method, controller firmware, drive firmware, and electronic keying to be matched together.
Migration to the published engineering replacement requires a system review of mounting, wiring, feedback, safety, network configuration, and the stored Logix project.
Availability, condition, price, and shipping time for 2097-V32PR4-LM are confirmed during quotation.
Allen-Bradley 2097-V32PR4-LM Kinetix 350 Servo Drive Manuals, Datasheets, Links
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
- The V32 construction includes an integrated AC electromagnetic-compatibility line filter
- The drive installation still requires the documented branch protection, protective earth, and shield-bonding practices
- Motor-power and input-power routing must follow the separation and grounding guidance in publication 2097-UM002
- Premolded feedback cables are selected from the supported motor-to-drive combinations
- The 2090-K2CK-D15M kit provides a low-profile connection for compatible flying-lead feedback cables
- Connector clearance must preserve the recommended feedback-cable bend radius below the drive
- The drive IP address is established before the axis is associated with the Logix project
- The Kinetix 350 Add-On Profile and electronic keying must match the controller and drive firmware
- Motor data, feedback polarity, motion direction, and Safe Torque Off operation are verified before production use
- Single-axis indexing and coordinated-motion sections controlled from a Logix platform
- Compact machine axes requiring EtherNet/IP motion and an integrated Safe Torque Off input
- Low-axis indexing tables using Logix-integrated EtherNet/IP motion