Fast Quote
Active
Allen-Bradley 2198-H025-ERS is configured with a supported Logix controller, motor, DSL feedback device, brake option, and approved 2090 cable.
Its official ratings cover 230 V and 480 V three-phase operation, and the installed supply must determine the selected operating point.
Check the complete catalog number, load profile, controller and firmware, motor-feedback pair, cabling, protection, regeneration, grounding, cooling, and Safe Torque Off validation before commissioning.
Allen-Bradley 2198-H025-ERS Kinetix 5500 Servo Drive Manuals, Datasheets, Links
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
Allen-Bradley 2198-H025-ERS is a Frame 2 Kinetix 5500 Servo Drive for one Logix-integrated three-phase motion axis. It provides Integrated Motion over EtherNet/IP and hardwired Safe Torque Off.
The documented outputs are 2.4 kW at 230 V three-phase and 5.1 kW at 480 V three-phase. Current ratings are 8.0 A rms continuous and 20.0 A rms peak.
Before installation or replacement, verify the supply, motor winding, DSL feedback and brake interfaces, approved 2090 cable, controller and firmware, protection, regeneration, grounding, enclosure thermal design, and Safe Torque Off circuit.





