- Single-axis Kinetix 300 platform with EtherNet/IP communications
- Removable memory-module socket supports documented parameter storage and service workflows
- Dedicated mains, DC-bus and shunt, backup-power, I/O, motor-power, and feedback connections
Allen-Bradley
2097-V33PR1 operates as one independently configured indexing axis and exchanges commands, status, and diagnostic information through its documented control interfaces.
The machine configuration includes the controller or indexing method, network and I/O assignments, motor and feedback selection, homing and limits, protection settings, and safety circuit.
Confirm the complete Series 1 nameplate, saved parameter set, connector hardware, motor and feedback cables, external shunt selection, enclosure clearances, grounding, and the engineering requirements of replacement 2198-E1004-ERS before commissioning.
Availability, condition, price, and shipping time for 2097-V33PR1 are confirmed during quotation.
Allen-Bradley 2097-V33PR1 Kinetix 300 EtherNet/IP Indexing Servo Drive Manuals, Datasheets, Links
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
- The V33 input arrangement supports the documented single-phase and three-phase supply options
- The mains input and 20...26 V DC backup input use separate connectors
- Input protection and conductor sizing depend on the actual supply configuration
- The status display and indicators identify documented drive and network conditions
- Record active faults and the parameter archive before disconnecting the drive
- Use the official troubleshooting sequence before replacing drive or motor hardware
- Mains power, DC bus and shunt, backup power, motor power, I/O, and feedback use designated connectors
- Connector kits and wire ranges must be checked against the installed hardware
- Torque, shielding, grounding, and cable separation follow the Kinetix 300 installation manual
- Single-axis machinery using a supported Kinetix 300 motor-feedback combination
- Indexed positioning or coordinated motion according to the documented drive-family control architecture
- Legacy Kinetix axes undergoing controlled maintenance or engineered migration to 2198-E1004-ERS