- 65 A rms continuous and 130 A rms peak single-axis output
- 44.9 kW continuous output at 480 V-class
- 85 mm module with 69.0 A DC input and 840 µF internal capacitance
Allen-Bradley
2198-S130-ERS3 is an 85 mm Kinetix 5700 single-axis inverter for higher-current axes in a shared DC-bus system with ERS3 Integrated Safety.
When integrating this module, verify that the selected bus supply supports the complete connected system and match the motor-feedback combination, cable set, controller, and firmware revision.
Before commissioning, check shared-bus and control-power hardware, conductor sizing, cable routing, regenerative duty, enclosure thermal design, grounding, and validated safety functions.
Availability, condition, price, and shipping time for 2198-S130-ERS3 are confirmed during quotation.
Allen-Bradley 2198-S130-ERS3 Kinetix 5700 Manuals, Datasheets, Links
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
- The inverter carries an IP20 protection-class rating
- The documented short-circuit current rating is 200,000 A rms symmetrical
- Circuit protection is selected from the Kinetix 5700 supply and SCCR tables
- Integrated Motion over EtherNet/IP provides Logix-based axis control
- Four configurable digital inputs are documented for Kinetix 5700 inverters
- A motor-brake relay output with inhibit functionality is supported
- Series B single-axis modules use the supported Kinetix 5700 firmware branch
- Studio 5000 Logix Designer version 31.00.00 or later is specified for Series B hardware
- Installed drive firmware must match the controller project and safety configuration
- Single-axis motion duties requiring the 65 A rms continuous rating
- 85 mm shared-bus layouts that use the S130 connector hardware
- Integrated-safety systems commissioned with compatible Logix controllers