Features:
- Two-part assembly: 1734-MB mounting base and 1734-RTB form the catalog assembly
- Removable wiring: the screw-clamp RTB detaches from the base for controlled service
- Eight positions: independent terminal locations support the installed POINT I/O module
1734-TB is intended for POINT I/O service strategies that preserve field wiring on a removable screw-clamp block.
The detachable RTB changes the maintenance path, but it does not remove the need to inspect conductors, clamps, labels, and latching.
Correct mechanical keying and DIN-rail seating remain essential when the base and wired block are reassembled.
Availability of 1734-TB is subject to Apter Power inventory and sourcing confirmation.
Allen-Bradley 1734-TB POINT I/O 8-Terminal Removable Screw-Clamp Base Manuals, Datasheets, Links
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
Allen-Bradley 1734-TB POINT I/O 8-Terminal Removable Screw-Clamp Base Specs
General
- ManufacturerAllen-Bradley
- Model1734-TB
- ConditionNew Original ready stock
- Product FamilyPOINT I/O 1734
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
Assess the removable terminal block
- Identity: verify the wired block is the screw-clamp 1734-RTB.
- Condition: inspect the handle, housing, screws, and conductor entries.
- Records: preserve terminal labels and the original channel map.
- Reinsertion: confirm the curved end and handle latch engage the base correctly.
Rebuild a reliable screw connection
- Wire range: keep copper conductors within the published limits.
- Ferrules: match sleeve and strip lengths to the official table.
- Torque: apply 0.8 N·m without damaging the terminal.
- Functional check: test every transferred circuit after latching the RTB.
Supported product applications
- Remote I/O maintenance: retain field wiring during approved base replacement.
- Screw-terminal cabinets: use an eight-position removable RTB for POINT I/O signals.
- DIN-rail stations: mount compatible modules through the keyed base assembly.
- Documented spares: support service plans that preserve a verified wired terminal block.