Ask our team:
  • Phone: +86 181 0690 9650
  • E-Mail sales1@apterpower.com

7IF361.70-1

/ 4.9
1001 reviews | Need a Specific Revision?
B&R 7IF361.70-1 is a System 2003 screw-in communication module with one electrically isolated RS485 interface for PROFIBUS DP slave operation.
In Stock
Ships by Wednesday, October 28
Fast Shipping Available
Get a quick price for 7IF361.70-1
Quantity
*E-mail
Company
*Mobile
*Content
Upload (gif, jpg, jpeg, png, bmp, doc, docx, xls, xlsx, ppt, pdf, csv)

Technical specifications for 7IF361.70-1

  • Manufacturer:
    B&R
  • Part Number:
    7IF361.70-1
  • Product Family:
    B&R System 2003
  • Product Type:
    System 2003 PROFIBUS DP Slave Interface Module
  • Stock:
    1
  • Fieldbus role:
    PROFIBUS DP slave
  • Physical interface:
    RS485
  • Interfaces:
    1
  • Connector:
    9-pin female D-sub
  • Maximum transfer rate:
    12 Mbit/s
  • Bus termination:
    External, using T-connector
  • Controller:
    SPC3 ASIC
  • RAM:
    1.5 kB
  • Power consumption:
    2.6 W
  • Degree of protection:
    IP20
  • Operating temperature:
    0 to 60°C horizontal; 0 to 50°C vertical
  • Storage temperature:
    -25 to 70°C
  • Relative humidity:
    5 to 95%, non-condensing
  • Status indication:
    Transmit and receive LEDs
  • Certifications:
    CE, UKCA, cULus E115267
  • Tariff Code:
    8538900000
  • Country of origin:
    Germany
  • Place of shipment:
    Xiamen, Fujian, China
By purchasing this item, you agree to the Terms & Conditions, ApterPower is not an authorized distributor for listed manufacturers or tradenames and therefore the manufacturer's warranty does not apply. All our products come with ApterPower's 1-year warranty.

More Information

Overview Manuals Interface Network Setup Diagnostics Application
  • Uses one electrically isolated RS485 interface
  • Supports transfer rates up to 12 Mbit/s
  • Provides transmit and receive status LEDs

7IF361.70-1 is a System 2003 screw-in communication module with one electrically isolated RS485 interface for PROFIBUS DP slave operation.

It connects a compatible System 2003 CPU to a PROFIBUS DP master and supports cyclic fieldbus data exchange at documented network rates up to 12 Mbit/s.

Before installation or replacement, verify the CPU slot, PROFIBUS station address, baud-dependent bus length, external termination, 9-pin D-sub pinout, GSD file, shield bonding and project configuration.

Availability, condition, price, and shipping time for 7IF361.70-1 are confirmed during quotation.

B&R 7IF361.70-1 Manuals, Datasheets, Links

Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.

  • Uses one electrically isolated RS485 interface
  • Operates as a PROFIBUS DP slave
  • Connects through a 9-pin female D-sub
  • Supports transfer rates up to 12 Mbit/s
  • Requires external bus termination at the physical segment end
  • Uses the official B&R GSD package for master configuration
  • Provides transmit and receive status LEDs
  • Supports diagnostic transfer through PROFIBUS DP
  • Requires address, shielding and segment-length checks when communication is unstable
  • Connecting System 2003 stations as PROFIBUS DP slaves
  • Cyclic process-data exchange with a PROFIBUS DP master
  • Retrofitting an existing PROFIBUS machine node while retaining its verified GSD and station configuration
Description
B&R 7IF361.70-1 is a System 2003 screw-in communication module with one electrically isolated RS485 interface for PROFIBUS DP slave operation.

It connects a compatible System 2003 CPU to a PROFIBUS DP master and supports cyclic fieldbus data exchange at documented network rates up to 12 Mbit/s.

Before installation or replacement, verify the CPU slot, PROFIBUS station address, baud-dependent bus length, external termination, 9-pin D-sub pinout, GSD file, shield bonding and project configuration.
Alternative Names
7IF361.70-1 7IF361701 7IF361 70 1 B&R 7IF361.70-1 B and R 7IF361.70-1 B&R System 2003 7IF361.70-1
Technical notes
B&R 7IF361.70-1 must be matched by complete material number, compatible System 2003 station or CPU, slot and terminal map, power and field wiring, saved project and connected devices. Back up the configuration and perform a controlled functional test after replacement.
Exceptional Service

Our Mission

  • 100% Satisfaction

    We believe expertise is priceless. With over 20 years of experience, and top engineers on staff, we can help you solve or avoid problems that threaten your business.
  • Trust Guaranteed

    Not only do we have a vast inventory, our team makes sure every piece of equipment is in working condition. Your purchases are also backed by our Warranty.
  • Expertise

    Time is money, especially when your equipment is down. We work quickly to get your equipment on its way so you can get it back up and running.

FAQS

The following is a list of questions commonly asked by our customers. Please contact us if you have a question about our process that is not answered below.
Can B&R 7IF361.70-1 operate as a PROFIBUS DP master?
No. B&R identifies this exact module as a PROFIBUS DP slave; the network requires a compatible DP master elsewhere.
Which file is needed to configure B&R 7IF361.70-1 in a PROFIBUS master?
Use the exact official B&R 7IF361.70-1 GSD package and verify that the master configuration matches the installed firmware and process-data layout.
Why can B&R 7IF361.70-1 communicate at low baud rates but fail at 12 Mbit/s?
Check total segment length, certified PROFIBUS cable, connector quality, shield bonding, stub length and termination; the permitted cable length decreases as baud rate rises.
Does B&R 7IF361.70-1 provide internal PROFIBUS termination?
No. B&R documents external termination using the appropriate T-connector or bus connector at the physical end of the segment.
Can B&R 7IF361.70-1 be replaced without changing the PROFIBUS master configuration?
Only when the station address, GSD version, module definition, input/output data lengths, parameter data and CPU slot match the original node. Compare the existing configuration and back up the master project before replacement.
Why can a replacement B&R 7IF361.70-1 remain offline even when the wiring is unchanged?
A station-address mismatch, wrong GSD/module layout, duplicate address, missing termination or incompatible master configuration can keep the node offline.
What should be tested after installing B&R 7IF361.70-1?
Verify the slave is recognized, compare configured and actual I/O lengths, check diagnostic LEDs and bus errors, power-cycle recovery and controlled process-data operation.